Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

well ive been busy at work and havnt had a chance to update for a while but good and bad news.... good news turbos back on with dumps and front pipes all good to go... bad news is that the ARC Airbox didn't fit with my Greddy intake kit :(

post-94184-0-41974100-1384071686_thumb.jpg

  • 1 month later...

well the surprise was a T51R!
it was almost ready to tune but decided to buy the HKS T51R KAI BB as ive always liked the sound and thought its time to put a single and start having some fun!

So tuner had to take off turbos again and put T51R on, its almost done, taking a little bit longer than I expected but needed to fabricate dump pipe, plumb the screamer into the dump pipe, once finished should be wiring in haltech and ready for a tune.

expecting it be finished real soon.

in other news I have a 4000km old twin turbo setup and some parts as you can see that only ever got bolted on and never used all up for sale :D

more to follow in the next few days

post-94184-0-55383000-1389053985_thumb.jpg

post-94184-0-83254800-1389053987_thumb.jpg

post-94184-0-58410700-1389053989_thumb.jpg

  • 2 weeks later...

The Car then made its way onto the DYNO where a leak in the inlet manifold gasket was found, so it got replaced with a NITTO Gasket and back on it went.
first was a tune on 98 @ 16psi and made 317kw we left that as the 98 tune as the car was going to be set up with FLEX TUNE and mostly run on E85.
the car then pushed 380kw @ 21.5psi on E85.

post-94184-0-00651800-1390985214_thumb.jpg

post-94184-0-88117200-1390985214_thumb.jpg

It's a little bit laggy compared to the -5s but you can feel the car build the power and the power delivery is amazing! Compared the 2 the t51 comes on boost later but it still has a feelin of torque in the midrange but it's a lot more dinner to drive and it feels a lot better to drive aswell the power delivery between gears are faster than the -5's overall happy with the decision to change. The twin turbo setup felt lazy and sluggish where the big single feels free and open if that makes sense

Cool. always interesting to hear how the car feels vs the dyno considering power and tourque are lower down low...good feedback! Must come on pretty strong!

Good point about performence between gears. I guess the power/torque differential down low isn't an issue between gears because you're in the higher range on shifts so you're net/net higher on both power and torque while you're hammering vs -5s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
×
×
  • Create New...