Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Not sure first time its ever done it. Then later it fluttered between 3000-3500 with no actual rev loss to motor. :/ Strange. Didn't play up at happy laps.

dry joints in the tacho can do it.

if you are decent at soldering, redo all the solder joints in the tacho.

Cleaning the injectors could just add to the problem.. The ECU is doing it because another sensor is out.. have you reset the ECU, clean AFM and make sure you don't have a air leak or atmosphere bov..

Could be fuel reg?

ECU has been reset, AFM cleaned just before that, stock return BOV. Can't hear any air leaks. Ran a error check on the ecu it came up thst everything was fine.

Afternoon whores...the SS went to the repairers today...lets see how long they take to give me an incorrectly repaired car back. 

5 weeks. Will sit at quoters for 2 weeks for the assessor to look at.

love the positive approach their Mikie.

Hopefully, it will be fixed soon. Just keep communicating with them.

I'm yet to find someone who has had a car repaired by them and be happy with it and not be f**ked around, my hopes that it would be different for me were dashed when they initially sent me to a place that doesn't do imports...

love the positive approach their Mikie.

Hopefully, it will be fixed soon. Just keep communicating with them.

^this. If you don't ring them they will not contact you. The only time I got any updates on my repairs was when I rang just car and got the repairers number.

Greg, I called that dude today about white rb30 - he sounded fully sic and tells me it's not modded, but genuine Tomei rb30 cam, valves, springs and retainers. He said High Octane got custom Tomei stuff for builder.

So what really happened is they bought a wade cam and a set of letter punches, stamped Tomei on the cam and charged him 4 times the price they bought the wade cam for, because he is a silly kebab.

Haha thanks. Just waiting on today to see if the skyline is ready. I owe zac so much for working on it

You still owe him for that maltesers incident, stop being slack.

^this. If you don't ring them they will not contact you. The only time I got any updates on my repairs was when I rang just car and got the repairers number.

Luckily I worked 500m from the assessors, they got to see me everyday as my patience wore thin

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
    • I could see someone trying this to save money on oil changes.
    • 65601-05U00 is the hood latch. 62550-08U31 is the support that holds it to the radiator core support. They are all super discontinued so I don't really have any great leads on how to source this stuff.
×
×
  • Create New...