Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

We have been pretty happy with the outlander thus far. No off roading yet tho.

Awaits 400 photos of the bogged outlander... Had an uncle try to take his on Fraser that was an interesting day lmao

Small "4wd's" are not for 4wding, most are incapable and just to Danm low

Unless you Usualy have lots of experiance with 4wding you can run into troubles

But I will say. Suzuki's they go hard off road

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

Interesting definition of 'real 4x4' you have :P

Low range, traction control, ladder frame chassis and same clearance as your navara. And at least it won't get stuck spinning diagonally opposite wheels in the air like yours will :P Edited by Bunta

Oh and stock it is on the low side, but nothing a cheap lift cant fix, and we are not into 'off road' where you go out and find places to get stuck and break shit, we just want a car that can do the fire trails ect.

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

I like where this is going :)

Morning folks.... Well events yesterday afternoon/night werent what I expected. Got a call from a mate at midday asking if I want to accompany him down to Matty @ Pits to get his car on the dyno just to check the replacement cam he got in is fine. I thought hell why not I finish work at 1:30pm it will be a good drive.

Got there at 3pm and and we got the car onto the dyno..

1_zps671f75e0.jpg

Matty played around with it for a while and fixed up a few things here and there. It came to about 6pm and was doing a few final power runs...

Knock Knock.......... who's there? Spun a bearing in the last 10 mins on dyno...

After many profanities were used Matty ended up dropping us at the train station and we got the train back to Sandgate then got a lift home....

Got home at about 10:30pm and then up again to start work at 5:30am...

Tired Scott is tired..

You went all the way down to see Matty Spry and didn't swing pass to say hi????

I also went to bed late paying for it now :/

Sorry to hear about your mates car Scottie.

What power did it make before she gave way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Did I tell you I really love skylines ? ! ‽
    • Ha ! Did mine as well. Used a Z hose I got at Supercheap and cut out what I needed. Then while everything was off changed out the water heater control block and the heater supply hoses to silicon on both sides. While attaching said hoses to the plastic hose fitting that goes through the firewall to the heater core they crumbled due to age. Got new heater core supply pipes, de gassed the air con took out the glove box pulled out air-conditioning fan unit and took out the heater core went to change out the busted pipes and went nope ! Went and got a brand new heater core, attached the heater core pipes, put the air con fan unit back in, re attached the new silicon heater hose, put the air conditioner fan unit back in got it regased annnnnnnnnd Bob's your uncle ! 5 minute job really ! AND I AINT DOIN THAT SH*T AGAIN ! ! 
    • just under 600rwkw , 1650cc,  pump e85 ~80% duty   Your 1200s won't make it safely
    • What’s the labour like on it? And how much better is it than the stock one? Guessing a lot stronger.    I would be shipping from Japan to Hong Kong so not that bad… 
    • It is the entire transmission BUT you must swap in your old transfer case. There is no transfer case on the back of it. Comes with throwout bearing for the OEM pull clutch and Super Coppermix Twin pull clutch, new clutch fork, pivot, cotter pin, washer, and clutch fork boot as well. Keep in mind shipping is killer for such a giant piece of metal. I got mine from Trust Kikaku USA which shipped a container full of them to Long Beach and I had to pick it up from their warehouse.
×
×
  • Create New...