Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


t5iv
 Share

Recommended Posts

Thinking like Nick here, and it is scary, but I imagine he is hoping you will miss a gear, then he will never race you again :P

Scott is Nick's Unicorn. The one he couldn't beat.

Link to comment
Share on other sites

If it was from a standing start, instead of a rolling start where every single factor is in your favor, you should be worried about his powah, but I will say one thing for you, you choose your battles well!

Yes well... I don't like losing. It makes me waste money lol

Link to comment
Share on other sites

Scott is Nick's Unicorn. The one he couldn't beat.

This actually happened at Downshift last month.. .Missed 3rd so he had me at half track. Got him back by the end though... Damn kids and there Auto V8's

Thinking like Nick here, and it is scary, but I imagine he is hoping you will miss a gear, then he will never race you again :P

Oh you mean.... Like this:

LbA8MoX.png

Bahahaha :rofl:

Link to comment
Share on other sites

Questions for Scott,

Are you running E85?

Are you planning to/have done official 1/4 miles with your current set up?

Yes

&

No

Cars runs E85 only, however i have it flex tuned with sensor....

Yet to run it down the 1/4 mile. Still a few things I want to get changed and adjusted before I go

Link to comment
Share on other sites

Yes

&

No

Cars runs E85 only, however i have it flex tuned with sensor....

Yet to run it down the 1/4 mile. Still a few things I want to get changed and adjusted before I go

sweet, thanks! I plan on doing a flex set up at some point too, I am being told that 1000cc injectors wont be enough, I will probably only make 350rwkw max so possibly even the 750cc ones I have now may be enough.

Will be interesting to see what it can do!

Link to comment
Share on other sites

sweet, thanks! I plan on doing a flex set up at some point too, I am being told that 1000cc injectors wont be enough, I will probably only make 350rwkw max so possibly even the 750cc ones I have now may be enough.

Will be interesting to see what it can do!

I make 420rwkw+ and only run 1000cc injectors

Link to comment
Share on other sites

I make 420rwkw+ and only run 1000cc injectors

Yeah i noticed that in your sig, people seem to be going nuts on the injectors for e85, yeah you use more but I was suggested 1200s which to me seems very very excessive, and your set up proves that it is.

Link to comment
Share on other sites

I think people are moving towards the huge ones as the price difference is pretty much nothing. I think 2000cc ones were like $10 each more expensive for me. I originally went 2000cc injectors but due to 3.oL bottom end the Plazmaman Plenum sits very high in the engine back and the Fuel Rail was fouling on it as the 2000cc's were too tall. So we went smaller. Id say they would be close to their limit though

Link to comment
Share on other sites

sweet, thanks! I plan on doing a flex set up at some point too, I am being told that 1000cc injectors wont be enough, I will probably only make 350rwkw max so possibly even the 750cc ones I have now may be enough.

Will be interesting to see what it can do!

doubt that very much Bunts.

I make 350rwkw on 98 with 1,000cc.

Although I know that E85 drinks more I'm pretty certain that 400rwkw is safely achieved with 1000cc injectors.

It's the fuel pump that needs to be up to scratch to deliver ;)

Link to comment
Share on other sites

doubt that very much Bunts.

I make 350rwkw on 98 with 1,000cc.

Although I know that E85 drinks more I'm pretty certain that 400rwkw is safely achieved with 1000cc injectors.

It's the fuel pump that needs to be up to scratch to deliver ;)

In regards to pump, I use intank pump only. Walbro E85 one. Pretty sure this is the one

http://www.sonicperformance.com.au/F90000267/Walbro-Fuel-Pump-Intank-E85-450lph/pd.php

Link to comment
Share on other sites

doubt that very much Bunts.

I make 350rwkw on 98 with 1,000cc.

Although I know that E85 drinks more I'm pretty certain that 400rwkw is safely achieved with 1000cc injectors.

It's the fuel pump that needs to be up to scratch to deliver ;)

Yeah the fuel pump I have should be sweet, and I have a surge tank and lift pump ready too, I think I will give it a go on the 750s and cross the running out of flow bridge if I come to it.

Link to comment
Share on other sites

Yeah the fuel pump I have should be sweet, and I have a surge tank and lift pump ready too, I think I will give it a go on the 750s and cross the running out of flow bridge if I come to it.

Sounds like a good idea. I am not privy to this motor vehicle you are assembling. All i know is it has a Crank trigger setup [Which im learning more about and jealous of lol] and now e85 with a good fuel setup. Sounds like a cool machine in the making

Link to comment
Share on other sites

Sounds like a good idea. I am not privy to this motor vehicle you are assembling. All i know is it has a Crank trigger setup [Which im learning more about and jealous of lol] and now e85 with a good fuel setup. Sounds like a cool machine in the making
yeah Bunts car should kick some serious bogan V8 ass once she's all done :P
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...