Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

If you can convince the company that they need you and couldn't operate profitably without you, you have a winning argument. Hence $20k raise at the beginning of the year. ;-)

that is very rare, as it is seldom that one person could have such an impact on a business. Especially in the resources sector

that is very rare, as it is seldom that one person could have such an impact on a business. Especially in the resources sector

If I amended that to 'as proftiably' would that be a more correct reflection? Of course, for this to occur, you would need to be at the top or very close to the top - especially within an arm of the business that closely related to sales.

If I amended that to 'as proftiably' would that be a more correct reflection? Of course, for this to occur, you would need to be at the top or very close to the top - especially within an arm of the business that closely related to sales.

it truly depends on the demographics of the business

Yes, if key senior personnel ie executives were to use their position as a bargaining chip to demand an increase in their remuneration package then it may work

Should it he reporting entity though - them auditors would be all over it

Especially the way the public now eyes deeply what how execs are remunerated

In a smaller sized business ie SME - most that are in a top position usually have the ability to influence everyone - making performance bonuses that much easier ;)

  • Like 1

Jawsome!

do tell how!

I was curious too so I did a little digging on the QLD/TMR site and I found this:

Moderately-Powered Vehicle Grounds

You may apply for a certifi cate of exemption if the car you wish to

drive was manufactured before 1 January 2010 and has:

• a supercharged or turbocharged engine, not diesel powered

• a power-to-weight ratio of not more than 125kW/tonne

• no other features of a HPV listed on this form.

You application must be supported by:

• a document published by the manufacturer verifying the

power-to-weight ratio, such as the owner’s manual or

information from the manufacturer’s website; or

• a specifi cation information test report.

A specifi cation information test report is issued by an automotive

service provider and must show:

• the name and address of the organisation(s) that conducted the

test(s)

• the date of the test(s)

• vehicle make, model, VIN/chassis number

• the vehicle’s kerb weight and maximum engine power

• details about the measuring system used to conduct the test,

for example, an engine dynamometer."

From what I've been able to find a stock 33 gts-t would have around 130ish kw/t if you're going off the factory engine and weight figures from nissan. That power to weight ratio wouldn't classify for an exemption however if you were to put the car on a weigh bridge and run it on a dyno it would most likely be under 125kw/t though. So I guess it's all up to which figures they take into account when doing the exemption.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What could be causing my clutch problem besides a bad master or slave then? Both those parts are new 
    • Just came across this, but in QLD I start leave again in 2 weeks, if it is still available I might drive up and check it out Unless, @MBS206 do you live near here????, if so I could hit you up with a finders fee https://www.gumtree.com.au/s-ad/hope-island/auto-body-parts/nc-mx5-factory-hard-top/1328976391
    • My hold point for future mods is that I want a OEM detachable hard top first, but, finding one is a pain, MX5 Mania are looking for one for me, but, as hens teeth are more common, finding one in Australia is proving problematic  I can get a OEM one from overseas, hell, you can still get new ones in 'Merica, but, shipping is a absolute killer and I cannot justify the cost, or the risk of it being damaged during transport As for the aftermarket hardtops, whilst they do the job of being a hard top, and are fine for a track car, they don't seal well (read: leak like a sieve in the rain), and you need a plastic/poly rear window, plus they are a bolt in option only and not made to be easily removed I liked how the hard top on my NB could be fitted, and removed, by myself, in less than 5 minutes I know it sounds bad, but I'm waiting for someone to write off a car with one so I can swoop in on their pain, it will go to a good home though, so my guilt of this is tempered
    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
×
×
  • Create New...