Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

I'm calm...but Chris is offering to let me take his GTR into uncharted territory...it's likely to spin a big end due to the surprise of actually being driven :P

Hey it get driven at least once a week on average now. Before it was lucky to come out once a month

Hey it get driven at least once a week on average now. Before it was lucky to come out once a month

By driven I mean smashing up a mountain at 5000-6000 rpm the whole time.

You bringing her out the the drag day Chris?

thread is useless without Smarties sexts or I call bullshit

You feel unloved? I've heard all about their sexts, Zane has even received a couple! You're missing out Ants, missing out! :P

You feel unloved? I've heard all about their sexts, Zane has even received a couple! You're missing out Ants, missing out! :P

sif that be true

You've a grip on Zane like vice now :P

  • Like 1

Moaning!

So a zedder down south has just finished getting his E85 tune. Propper built vg with 28RSx2 and full breathing mods.

Prelim dyno sheet looks thik this:

post-33729-0-62188700-1410993408_thumb.png

final results are:

18 psi - 430+rwkw (580rwhp)
24psi - 470+rwkw (630rwhp)
27psi -26psi - 492rwkw (660rwhp)

Take that into your backface rb's :P

Also, I spent an hour last night installing my new splitfires and denso iridium plugs, so that is a couple of things off the checklist before Sat.

Other things to do are:

check catch can isn't full and the filter on the top is still good

make sure the oem rear wheels with mickey t's fit over the brakes (confident they will but don't want to drag them all the way there and not have them fit).

Edited by MagicMikeZ32

Moaning!

So a zedder down south has just finished getting his E85 tune. Propper built vg with 28RSx2 and full breathing mods.

Prelim dyno sheet looks thik this:

attachicon.gifuntitled1.png

final results are:

18 psi - 430+rwkw (580rwhp)

24psi - 470+rwkw (630rwhp)

27psi -26psi - 492rwkw (660rwhp)

Take that into your backface rb's :P

Also, I spent an hour last night installing my new splitfires and denso iridium plugs, so that is a couple of things off the checklist before Sat.

Other things to do are:

check catch can isn't full and the filter on the top is still good

make sure the oem rear wheels with mickey t's fit over the brakes (confident they will but don't want to drag them all the way there and not have them fit).

ok

By driven I mean smashing up a mountain at 5000-6000 rpm the whole time.

You bringing her out the the drag day Chris?

Was hoping to be able to come down and spectate again this year but will be working unfortunately

Was hoping to be able to come down and spectate again this year but will be working unfortunately

thats ok, just give the key to Uncle Natro he will take it down the strip

People are assholes. I am sitting here waithing for the service centre at nundah to open so I can drop my car off. I went up the street a little and found a park to wait it out. Old mate rocks up in his dmax, his solution? Just double park and block half the road for 20 minutes. Dick.

Even I am taking the purple snot rocket down the track Andy, you should still at least come out and watch.

Watch the Skylines get annihilated, by Z cars and V8s..... Not by purple Silvias though :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...