Jump to content
SAU Community

Whats my car worth?

Chris32
 Share

Recommended Posts

Chris32 Veteran

Chris32

Posted
Posted

After a idea what everyone reckons my cars worth, details as follows......

1993 R32GTSt - gunmetal grey

120,000km genuine

HKS GT2510 turbo - makes 200rwkw at 0.9bar boost

FMIC 600x300x65

Re-mapped ecu by Tilbrooks

Bosch 040 fuel pump

DBA slotted rotors and racebrakes pads

Extreme 12 button ceramic clutch with 4.5kg cromoly flywheel

Buddy Club P1 racing wheel 16x7.5 with new Dunlop FM901 tyres 225/16/50

R33 GTR front seats

Quantum coilover adjustable shocks all round

Greddy Profec-A boost controller

Hicas lock kit, and adjsutable front camber arms

car is in great condition

What are everyone's thoughts? May be selling it in the near future, would I get more if I took all the good stuff of and sold the car as standard, and then sold all my parts?

Cheers, Chris

Link to comment
https://www.sau.com.au/forums/topic/43134-whats-my-car-worth/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Hard to say.

A car yard would try for 20 im sure....

Private probablly 15.... or so.... It would sell in a few weeks

Taking the good bits out is only gonna cost you. To get standard stuff to replace it i mean. Also this extra stuff separates your car from the one little johnny has seen else where and if yours is a similar price then which would you pick???

Id personally give you 14 firm with bout 2-4 months rego

funkymonkey Grand Master

funkymonkey

Posted
Posted

i'd say wait till the 15 year rule is changed (coming soon to a state near you!) then when r32's are impossible to get cheaply, sell it for an arm and a leg. If you sell now all this 1989 r32 rustbucket influx will devalue your car.

Chef_32 Mentor

Chef_32

Posted
Posted

I reckon there's at least 3g of stuff you could seel off the car if necessary. Try to get a few offers, if they are low, sell some of the mods seperately and you can get a bit more for it. Say if someone offers you 15g, you could probably sell your turbs, cooler, seat and rotors for at least 3g, and sell your car for like 14000-14500 to someone else.

just a thought

Chris32 Veteran

Chris32

Posted
  • Author
Posted

Yeah, I reckon unless I could sell it to someone I knew or of the forums I'd take alot of the decent stuff out, and sell it closer to stock,

I reckon 17,000 is pretty good value, as it is a 93 model, not a 89 model

I have a heap of spares for it too, GTR bonnet + grill + latch, spare motor, new S/S exhaust manifold, GTR cams, all waiting to go on if I don't sell it.

Interesting to get a idea of whats it worth though, I guess it all comes doen to what someone wants to pay for it

Here's a pic as well

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20 in need of modest love injection

      By GTSBoy · Posted

      As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • QB6SAGR
      RB20 in need of modest love injection

      By QB6SAGR · Posted

      Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • Duncan
      R33 GTR lift points for hoist

      By Duncan · Posted

      FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...