Jump to content
SAU Community

Recommended Posts

Garage clearout today and found a few things not needed. Check seller feedback, and feel free to pm the dudes that bought my stuff, no dodgy deals here.

first up, Aeroflow liquid filled efi fuel pressure gauge. Bought this when I briefly tried the nismo FPR (now sold and another happy customer on here) so it's not had much use (less than 1 month on car) and in VGC. Comes ready to go with brass fittings as pictured, all you got to do is cut and clamp your fuel supply hose onto the barb fittings as pictured. $50 posted anywhere in Oz

post-78602-0-29688500-1378625826_thumb.jpgpost-78602-0-74853000-1378625841_thumb.jpg

next, Kinugawa adjustable wastegate for stock R33/r34 turbo as found here

http://www.ebay.com.au/itm/Kinugawa-Adjustable-Turbo-Wastegate-Actuator-Nissan-Skyline-RB25DET-R33-/281163573117?

This was only on car for about 2 weeks and vgc, some minor markings on actuator shaft from grabbing it with pliers to hook it on/off flapper and end of shaft was cut by about 5mm as was too long to fit over flapper arm properly. Now - they say 11.8psi wastegate, I found it *did* start to move at around 12psi when testing with air compressor, but realistically with hiflow turbo was holding boost more around 14-15 psi and I kept hitting fuel cut, so went back to r32 10psi actuator. Other than that fitment and quality of product is fine, pretty solid actually. After $60 posted anywhere in Oz

post-78602-0-70892000-1378626226_thumb.jpgpost-78602-0-08372400-1378626244_thumb.jpgpost-78602-0-83367700-1378626653_thumb.jpg

Trust/greddy panel filter for stock R33 (plus R34 and others) airbox. VGC, and due to fibre construction is cleanable with vacuum and compressed air. Still with box as pictured. $40 posted anywhere in Oz

post-78602-0-55440700-1378626371_thumb.jpg

Apexi avcr boost controller. Now- screen doesn't work, flickers occasionally and flashes on startup. Guy who repairs vacuum flourescent displays like old-skool checkout registers etc told me easy enough to repair but I never got around to it, feel free to make your own enquiry though. Unit itself still works fine, just can't see display at moment. Comes with all cables, map sensor, boost valve as pictured (greddy boost valve in photo, apexi one still on car, will swap over for sale). $120 posted anywhere in Oz.

post-78602-0-12254600-1378626624_thumb.jpg

all items located in Brisbane but can deliver locally or post anywhere.

Also still have the R34 sidemount intercooler, R33 engine mounts, Toyo proxes tyres for sale as per other posts, at very reasonable prices.

for 48 hours only :P, $10 off everything above and prices include postage anywhere in oz.

Kinugawa actuator, greddy panel filter and fpr sold.

apexi avcr still available, some dude on facebook jdm parts is selling just the screen and his solenoid not working for like $100..put em together and you got a working avcr plus some spare parts, jeeez what more you need :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok awesome! I’m not running a aac/iacv (although I do have the r34 iacv but I’m running the heater core loop. I’m running the chase bays booster delete so In that case would I need to block off those posts? So at the moment I need to run from one of the posts to the fpr and then a separate post to the boost controller then to the wastegate? Also I’m assuming that each port has a specific use like the first one farthest to the left would be (for example) manifold to fpr and then second would be to boost controller?
    • I was just going through this on Neil's car (33 gtst). Assuming you are using standard AAC and Cold start valves, you need Post Turbo Pre throttle to Boost Controller (if you have one) then to Turbo Wastegate Pre throttle to AAC input AAC input T piece to Cold start input Cold start output to plenum post throttle AAC Output to plenum post throttle AAC Output to brake booster (needs a 1 way valve) Plenum post throttle to Fuel Pressure Regulator Plenum post throttle to Blow off valve signal Plenum post throttle to Boost controller input (if you have one)
    • I’m trying to figure out the purpose of these fittings. Assuming they’re for coolant but not sure where the lead to. I know the bigger one on the right (which isn’t filled) is the brake booster. If anyone has a photo of a diagram of this intake or has a set of instructions it’d be greatly appreciated 
    • How much is that r32? Is that $170k or $1.7m 
    • Ahhh! My silly brain was thinking Nissan started selling them straight away, but they waited w or three years didn't they?   Maybe Duncan should build an R35 race car over the V37... There's a cheap yellow one on car sales Duncan, would only need your splash of purple added...
×
×
  • Create New...