Jump to content
SAU Community

Recommended Posts

Morning fellas,

As the titles states I seem to be having a major issue with the A/C in my ECR33. It seems to be leaking refrigerant in the passenger footwell and as its evaporating (through the vents for the demister), fogging up on the windscreen as it goes. There's no overheating problems with the engine at all, as temps are normal throughout.

2EF7EBC5-118A-4446-B529-A25DFC817703-212

C9CEFC9A-18EA-470C-AB3B-0EA54DE6B72A-212

^Where the leak in the cabin is occurring.

Now basically this needs to be fixed ASAP, but will the leak/evaporation continue to occur if the car is driven without the cooling system used at all, and has anyone ever had a similar issue at all?

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/
Share on other sites

is there any refrigerant left?

If this is the case, disable the A/C immediatly or you may destroy the compressor if you turn it on.

Are you sure that its the refrigerant causing the window to fog up? Or just because there is no A/C action to demist the window?

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7020810
Share on other sites

ac systems have a pressure sensor, so if there is no gas in the system it won't engage the compressor and damage it. Are you sure it's refrigerant, it might just be condensation due to the drain being blocked. The refrigerant is a gas that dissipates, the lube oil is what would drip out, so is that liquid oily or watery?

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7020875
Share on other sites

That could definitely be the heater core. I had the same in one of my cars. Wet passenger footwell and foggy windows.

Get a white paper towel and press it onto the wet area. Check its colour. Smell it and feel it. You'll know if its coolant if it is. It could be your ac drain but I doubt you've used your ac enough for that.

Edited by SargeRX8
Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7020969
Share on other sites

Thanks for the replies fellas. Okay I could be wrong, but the window definitely isn't just fogging up because of the A/C demister not working, the fluid leaking is 100% causing the fog up. Also ill double check coolant levels when I get home, but the smell coming into te cabin has a very distinct collant sorta smell too it.

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7021256
Share on other sites

Coolant smells really strange, you just know its coolant. It also feels oily to touch. There are two methods to fix, the hard method is to replace the heater core. The easy method is to bypass heater core then use an air compressor into the core to shoot the rest of the water out.

Also to clean up the coolant do what I do, go to the local 24hr carwash and throw two bucks into the vacuum machine.

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7021577
Share on other sites

There is a "how to" in this site on changing the heater core without pulling the dash out (via the glovebox etc). Due to try it myself shortly.

Cheers mate ill be sure to check it out, that's the main thing that had been putting me off replacing the core itself. The sheer effort of the dash removal lol.

Edited by gtsttrk
Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7027454
Share on other sites

gtsttrk, on 19 Sept 2013 - 22:55, said:

Cheers mate ill be sure to check it out, that's the main thing that had been putting me off replacing the core itself. The sheer effort of the dash removal lol.

Here ya go:

http://www.skylinesaustralia.com/forums/topic/280174-removal-replacement-of-heater-core-skyline-the-right-way-without-removing-the-dash-at-all/

Link to comment
https://www.sau.com.au/forums/topic/431888-r33-ac-problem/#findComment-7027701
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
    • I'm almost at a point where I feel like changing the alternator. Need to check the stuff you mentioned first though.
×
×
  • Create New...