Jump to content
SAU Community

Dr30 And Hr31 S13 Based Coilover Kits (With Bump Steer Correction Kit )

clubracer

By clubracer,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

clubracer Community Regular

clubracer

Posted
Posted

Hey guys,

I'm in the midst of designing a toe/bump steer correction kit so that owners of 30 and 31 Skylines can run S13 coilovers with S13 uprights.

Would love to know how many are interested in this. Am thinking they'll be around the $150 - $175 mark, or I'll do them for $1300 with a set of G-Force coilovers.

I'll probably only get 10-15 kits made to start with so please let me know an idea of numbers.

Cheers

Peter

  • 3 months later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys,

Here are the basic mockups of the bump steer correction kit (not finalised) and I've also created a rear coil over adapter - as you know S13 coilovers in the rear of a DR30 need to be at their highest setting (usually) just to get a lowered ride height (can't get a standard height) so I have created these that will bolt onto your coilovers so you have more height range adjustment, plus no need to drill holes as it converts from 2 to 3 hole.

Haven't worked out pricing yet but will be using top quality bearings on the bump steer kit which might drive up the price a little, but you don't want them failing on you!

bump-steer-correction-dr30-1.PNG

bump-steer-correction-dr30-2.PNG

DR30-S13-coilover-adapter-kit.PNGDR30-S13-coilover-adapter-kit-2.PNG

  • 2 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys,

I'm finalising the design and these should be in production in March. Just some final measurement checks and also some dust boots for the bearings. The complete kit front/rear will be around $250 - $280 and will come with everything you need to grab your S13 front uprights, S13 coilovers and bolt them in.

Please note this is for the DR30. The R31 kit will differ slightly.

Looks like we have 5 interested guys here. I'll be producing 10 kits to start with.

  • 2 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

I've made a design change. It came to my attention that the kit wasn't going to be IPRA legal (which is what I'm building my DR30 for). Tie rods ENDS are free, but I have to use standard tie rods (or from another similar car). The use a normal rod end would put too much strain in the shank, so I've designed my own tie rod end that takes a motorsport spec spherical bearing. The good news is its a more elegant design, although it might cost a touch more, it will be more robust.

bump-steer-correction-dr30-v2-14mm.PNG

  • 3 weeks later...
  • 1 month later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Okay so the new design (not shown yet) is in production. Here is a replacement tie rod end (that takes a spherical bearing). I'll have the full batch by the end of the month, then have them in my car for testing asap.

tie-rod-end-pre-coating.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...