Jump to content
SAU Community

Recommended Posts

Hey guys, New to the forum.

Im in the process of buying an r32 gtr and sent out RACV to give the one im keen on a checkover and reported back all sorts of issues.

- Oil leak on front, rear upper engine

- Gearbox oil leak

- Clutch fluid contaminated/ low

- Brake fluid contaminated

- steering rack fluid leak

- Brake hoses perishing/ageing

Do you think these are all due to fair wear and tear, constant abuse or tell tale signs of something bigger?

Seller has stated that he has not done a rebuild of the motor so if I do go ahead with the purchase, is that what im in for?

Thanks for your input and recommendations

Link to comment
https://www.sau.com.au/forums/topic/432256-buying-r32-gtr-oil-on-motor-issues/
Share on other sites

for a 32 gtr that is all pretty standard stuff and hardly an issue and all remedied by a major service. Getting a compression test (and leakdown) will be your best indicator of a sound car. They are a tough motor so can stand the test of time if nothing to evil has been done to them.

Nonetheless, also look up (search in the forum) the oil pump issues on the GTR motor and in particular the short nose crank of the R32 GTR.

Otherwise, how does it drive? Does the gearbox feel overly tight to shift or grind?

Also if it is on its stock turbo's then changing them ($$$) is a good idea as they are prone to failure at that age too, especially if spirited driving is on the menu (turbo failure often requires a full turbo and motor rebuild = $$$$$$)

Edited by jjman

for a 32 gtr that is all pretty standard stuff and hardly an issue and all remedied by a major service. Getting a compression test (and leakdown) will be your best indicator of a sound car. They are a tough motor so can stand the test of time if nothing to evil has been done to them.

Nonetheless, also look up (search in the forum) the oil pump issues on the GTR motor and in particular the short nose crank of the R32 GTR.

Otherwise, how does it drive? Does the gearbox feel overly tight to shift or grind?

 

Also if it is on its stock turbo's then changing them ($$$) is a good idea as they are prone to failure at that age too, especially if spirited driving is on the menu (turbo failure often requires a full turbo and motor rebuild = $$$$$$)

Thanks for your reply.

The turbos have been changed to r34 gtr turbos and have seen 40k kms.

When we went for a drive in it it felt smooth as all hell except my mate said that 2nd And 3rd synchros are out and need replacing. Also needs New bushes for suspension.

If it is still running a standard motor you will be up for a rebuild at some stage (if its this year or next who knows) they are a 20 year old car that have had nothing but a thrashing. In my honest opinion either buy one with full reciepts for a rebuild OR buy one with a blown engine and get it done yourself.

Oil issues are the achillies heel for the R32 and i would be quite careful around it.

As said above make sure you will have cash aside if you do get one because if it is a standard motor it WILL break.

Just my two cents from experience.

If it is still running a standard motor you will be up for a rebuild at some stage (if its this year or next who knows) they are a 20 year old car that have had nothing but a thrashing. In my honest opinion either buy one with full reciepts for a rebuild OR buy one with a blown engine and get it done yourself.

 

Oil issues are the achillies heel for the R32 and i would be quite careful around it.

 

As said above make sure you will have cash aside if you do get one because if it is a standard motor it WILL break.

 

Just my two cents from experience.

On average what would a full rebuild cost?

Mine broke $20k and i stopped adding up reciepts. but i had to do quite a bit because mine broke pretty hard. expect to spend 6-10k refreshing the engine (if you pay a workshop to do it all). It all depends on what kind of power you want/how strong you want it to be etc....

i would honestly look for one with a blown engine for like 8-9k and sink another 10k into it and you will be laughing.

Edit: An old saying my mate told me before i got mine. "If you can't afford two, don't buy one"

and its sooooo true.

Edited by Anfanee

all sounds pretty normal for a 20+yr old car.

rubber seals get hard and start to leak.

coming from the top of the engine, should only be cam cover seals.

the gearboxs wear 2/3/4 synchros, so thats normal.

brake and clutch fluid are easy ones.

and the steer rack leaking, how bad?

the engines are pretty tough.

if not taking it to yhe track, the short nose crack isnt that bad.

mine withheld 4yrs of spirited driving.

ended up failing due to oil usage and me not checking the the level.

if that happens, save your pennys, and throw in an r34 motor.

or, if going for big power, rebuild.

either way, youll end up loving the car.

dont know a gtr owner who hasnt.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...