Jump to content
SAU Community

This May Hurt Your Brain, R32 Gtr Moonface Racing Parts

SimonR32
 Share

Recommended Posts

SimonR32 Grand Master

SimonR32

Posted
Posted

So I've been on a hunt for a little more front track on my R32 GTR while also giving some more free camber as a result. I could just get my cash out and go the Ikeya Formula route but I'm trying to save money during the time my new house is getting built so I'm looking for a cheaper option. Enter Moonface racing who seem to specialise in this kind of thing...

First they have standard roll centre adjusters (which I already have albeit in Greddy form)

s57-1.jpg

Then they have these offset roll centre adjusters with ball joints that would do the trick, only issue is they are the best part of the Ikeya Formula kit which I would rather have.

s76-1.jpg

and then come these... What they call a Racing plate Camber Adjuster, which appears to be an offset roll centre adjuster but by the photos appears that the bolt centerlines and locating circle are still the same geometry as normal with only the spacer offset which wouldn't actually change anything?!?

s79-1.jpg

Tell me I'm going crazy but I can't for the love of me see how these work? They are a really cheap option if they did offset the ball joint but they don't?

Or tell me to stop being a jew and buy the Ikeya Formula kit :)

n-flowakitgtr.gif

ichi-go Rising Star

ichi-go

Posted
Posted

Stop been jew and get Ikeya parts

Having said that, I thought they are two different things? Sure the Ikeya is more expensive but it does replace your LCA and tension rod in one nifty package

That MF RCA is not cheap by all means

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      They also make them with the motor mounted on the side 
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      I only recently purchased the vehicle, it came with the flex setup but the current tune is e85 only, which is why im wanting to get the tune redone to enable a mixture.  First i need to get the exhaust redone tho. I was thinking of getting a varex muffler but it sems they dont fit well in the 33 (hang low because of the valve mechanism which sticks out on top) and generally dont sound good. So that leaves me with redoing the entire exhaust (more resonators and mufflers) so its not a menace when i come and go from home, and then have the aes dump valve somewhere along the line to really open it up. I was thinking of having it before the cat but after seeing how insanely loud it will be (on a vl turbo) im thinking of putting it more towards the rear of the car, after one of the resonators. 
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
×
×
  • Create New...