Jump to content
SAU Community

Recommended Posts

Hi Everyone

Can anyone confirm this:

Front 4.0 kg/mm
Rear 5.0 kg/mm
(source: GTR mag)
Usually the front is more than the rear, but in this case, it isn't?
I'm trying to choose springs to get for my new setup, and just wanted to know a few things about the factory setup.
Can any one help out?
Thanks

Yes on GTR's the Nissan/Nismo stuff is softer at the front than the rear other than the R32 Nismo which is the other way around.

Most of the other aftermarket gear isnt because they usually dont much bother with tailoring their gear to individual cars or realise that most people drive the things in a straight line anyway where you do want softer rears.

Nismo S tune:

5300S-RSR45
Nissan - Skyline GT-R - BNR34 - F:6.0 R:6.7
It is that way to help reduce understeer. Ofcourse depending on your objective/tyres/camber/sway bar/attessa/power output you may choose differently. But generally GTR's are, handling wise, horrible understeering shtboxes and you end up using every trick in the book to try and make the nose heavy buckets turn.
Edited by djr81

Thanks for the reply - I might get aftermarket gear to match the factory balance. Does anyone this this is a bad idea?

I'll either stick with 4 Front 5 Rear, or maybe 5 front 6 rear.

Its just mostly going to be a street car so I don't want it to be too rough - our roads are shit.

IIRC SK used to recommend that you match the spring rates to the weight balance, ie if its 60:40 front rear then the spring rates are also 60:40 front rear, and you fix the understeer with sway bar rates (if possible). Maybe a middle road between the two approaches using even rates would be the best compromise? The trade off is ride/handling (weight balanced spring rates) vs better front/rear grip balance (stiffer than weight balanced on the rear).

My 32 GTR is 8/6 spring rates with the front sway bar of full soft and the rear sway bar on full hard. Still understeers.....maybe i should try the Nismo understeer fix and get softer springs in the front.

I was thinking of sticking to the factory spring rates, and lowering the car. Because the car will be lower I figured it would be slightly more rough/rigid than standard anyway.

But I will look into the weight distribution of the car and see what suits it best.

Going to go for a set of Tein Monoflex, and the new G Sensor/active auto dampening. Just need to know what spring rate I want because I won't be racing it much at all and want it to have a nice ride on the street.

Does anyone have any suggestions for spring rates?

As I said, I won't be racing it much at all, its mainly for the street. And I have to be mindful about my back, as since some last retarded piece of shit ran a red light and hit me, my back isn't too flash.

I'd like a firm ride, but not rough as shit lol.

Found this:

This responsiveness is even more amazing considering the Skyline's uneven weight-distribution of 57% in front and 43% in the rear. Usually a layout like this would be expected to be dominated by understeer, but due to ATTESA's intervention, the car is given a more sportive, rather oversteering character. Be careful though, pushing the car to far to its limits may result in a sudden loss of grip at the rear wheels - partly because of the uncompromising Bridgestone tires.

Does anyone have any suggestions for spring rates?

As I said, I won't be racing it much at all, its mainly for the street. And I have to be mindful about my back, as since some last retarded piece of shit ran a red light and hit me, my back isn't too flash.

I'd like a firm ride, but not rough as shit lol.

If it is just for the road I would reckon something about 5kg/mm is of the right order.

Found this:

This responsiveness is even more amazing considering the Skyline's uneven weight-distribution of 57% in front and 43% in the rear. Usually a layout like this would be expected to be dominated by understeer, but due to ATTESA's intervention, the car is given a more sportive, rather oversteering character. Be careful though, pushing the car to far to its limits may result in a sudden loss of grip at the rear wheels - partly because of the uncompromising Bridgestone tires.

Yes alot of sh!t was written by people who dont know what they were talking about. The %'s are right but the rest is nonsense. You need to differentiate between what happens when you are off or on the throttle. Off throttle the things understeer. On power they respond to however you have set up the 4WD system.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...