Jump to content
SAU Community

Recommended Posts

My Stagea Air con is not cold, even after a regass. anyone else have this problem?

My aircon is crap. I was wandering if it was a nissan thing or there is something wrong with it. I took it to an auto electrician who specialises in airconditioning. I told them it wasnt cold enough, and I didnt care how much it costs, I just want it cold! So they regassed it and put a dryer in it, and it made no difference. My 2001 Outback was twice as cold, im sure of it. I took it back to them and they said its as cold as they get. If i set the climate controll to 18 degrees even on a long trip on a mildly hot day, it doesnt freeze your face off. If I did this in my previous cars, it would get uncomfortably cold after 30 mins of driving. Im not convinced that its "normal" for the aircon to be so crap. Does anyone have cold aircon? Maybe I should take it somewhere else?

Link to comment
https://www.sau.com.au/forums/topic/432855-stagea-air-conditioner-not-cold/
Share on other sites

ummmm is the temp changing at all? as in if you go hot and turn it down does it get cooler, mine(r33) stays hot all the time cause of motor that adjusts the flap to control the temp is stuffed, dont know if its the same in a stag or not, have you tried running the air con diagnostic?

18 degrees being the minimum the display can go, isn't that just open vent from outside? Try 18.5 degrees...

If it is indeed working, you will find the newer gasses are crap and perhaps that is the best you can achieve with them. Why the old gas needed to be drained out in Japan is anyones guess.

If you try 18.5 degrees & the air starts blowing hot, its likely the cabin air temp sensor under the steering column is either disconnected or faulty.

Also, the climate control works through the daylight sensor as well - possibly if its not in direct sunlight, it won't blow 'face freezing' cold for a sustained period?

My air cond is pretty chilly - got it regassed after the new engine went in. Do you have an automotive aircond shop in your town (rather than a sparky who does it as a sideline)? All Nissans seem to have the same system and a competent shop should be able to get it working for you.

Thanks for your suggestions guys. I have an Xanavi system, and I ran the diagnostics, before and after the regass. The before was because, if I set it to 18.5, it was fully hot. If I put it on 18, it was cold, so no climate control :-) I suspected the sensors or the actuators. They returned no codes at all and when I made adjustments and watched the flap, it was operating as it should. One notch on the dial made the flap move one increment, it match every move, dial for flap. Anyhow the second diagnostic I ran afterwards was the same. Anyhow I gave up on the heating, in winter I dont care for the heating, but my wife has to fiddle with the dial when she is a passenger to stay comfortable lol. As for the cooling, I figgured if it was set to 18, and the compressor was running, then the aircon should be as cold as it can get. I will take your advise KiwiRS4T as this worked last time I wasted money on an auto elec for my skyline. The air con mechanic sorted it out right away.

I have a 25G that is sussy in the temp dept. After a front rebuild the aircon was regassed but after a month or so, no more cool.

Air con man checked and there is a gas leak inside the car, behind the glove box. He said it would need a new condenser and TX valve.

His test unit is like a geiger counter. The electronic beep gets faster/louder when the gas is detected.

He must be right caus his name is Dave and he drives a Volvo. LOL

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lol a few are like that with no intention of being reborn unfortunately. 
    • Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...