Jump to content
SAU Community

Recommended Posts

Lol don't listen to the self proclaimed king of lag either! Go with 9's forget about 7's and 5's! :D

Everyone knows how much fun it is losing to a stock WRX at the lights unless you're spinning your car to redline in the 1st 3 gears!

Your incorrect proclamation not mine.

If anyone with - 5s has issues with rexxys, you are shit drivers probably the same people that need - 9 or 7 to launch off the line properly and make up for your lack of skill. :P

  • Like 1

Another question. What cams are avaliable as a drop in replacement just trying to figure out my next move I've got power fc 550cc injectors apexi induction. Adjustable cam gears zorst not sure on size or anything tho may have standard dumps and fronts not sure yet and I just purchased boost controller not fitted yet and just thinking what else I can put in relatively cheap ish under 1k before I get the boost controller in and dyno'd and dialed in. I'd really like to hit 300+ kw.

I'm at 245kw atm

Well I know it has jasma cannon roughly a 3" system to the cat I just string measured it one day. But turbo to cat not sure. And I figure if the cars getting dyno'd I might as well make it worth it. If not cams and zorst what else would you suggest

Edited by 0zhiph0p

I was thinking e85 now that she's not a daily but I'll have to get bigger injectors again and pump I guess.

But other than exhaust cos I'll check over the weekend to see they may have already been changed. I bought it with mods zorst cam gears and intake. what would you all suggest.

Edited by 0zhiph0p

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
    • Sorry, I wasn't very clear.....just that the standard injectors are apparently good over 600rwhp/450rwkw which you won't get to on standard turbos anyway.....they are much better sized from factory than we are used to in RBs.
    • I'm not sure where you are, but United Terrey Hills has E85. 
×
×
  • Create New...