Jump to content
SAU Community

Skyline Built Not Starting

perzn_34

By perzn_34,
in Engines & Forced Induction

 Share

Recommended Posts

perzn_34 Experienced

perzn_34

Posted
Posted

Hey guys so i haven't had this car for long. Its a 1994 s1 r33 gtst with a built motor td06 turbo etc etc.

i did a compression test last week numbers came out good, and then i did a wet compression test with adding oil in each cylinder individually. I put about half a oil bottle cap worth for each cylinder.

After that put everything back together, then started the car and alot of white smoke came out which im guessing is normal from the oil in the cylinders. I took it for a spin around the block and white smoke was still coming out but less and kept getting less. i then took it in the garage and turned it off. didnt touch it for a week.

So after a week i came to start the car and it wouldnt start, it cranks but wont turn on. Fuel lines have pressure but just wont run.

i thought maybe my spark plgs are stuffed from the oil so put new ones and still the same

I have split fires, i pulled one out put a screw driver in it and put it near the head and no sparks, so i know there is no power going to my coils. Note this is a s1 r33 with the ignitor on top of the motor at the back.

So what i dont understand is the car was turned off and not touched for a week and this happens, obviously nothing has been touched..

SO i know its a power issue, anyone can help or give advice??? PLSS

btw ecu is a haltech pro plug and play

Link to comment
https://www.sau.com.au/forums/topic/433039-skyline-built-not-starting/
Share on other sites
Cyifly Community Regular

Cyifly

Posted
Posted

Hey guys so i haven't had this car for long. Its a 1994 s1 r33 gtst with a built motor td06 turbo etc etc.

i did a compression test last week numbers came out good, and then i did a wet compression test with adding oil in each cylinder individually. I put about half a oil bottle cap worth for each cylinder.

After that put everything back together, then started the car and alot of white smoke came out which im guessing is normal from the oil in the cylinders. I took it for a spin around the block and white smoke was still coming out but less and kept getting less. i then took it in the garage and turned it off. didnt touch it for a week.

So after a week i came to start the car and it wouldnt start, it cranks but wont turn on. Fuel lines have pressure but just wont run.

i thought maybe my spark plgs are stuffed from the oil so put new ones and still the same

I have split fires, i pulled one out put a screw driver in it and put it near the head and no sparks, so i know there is no power going to my coils. Note this is a s1 r33 with the ignitor on top of the motor at the back.

So what i dont understand is the car was turned off and not touched for a week and this happens, obviously nothing has been touched..

SO i know its a power issue, anyone can help or give advice??? PLSS

btw ecu is a haltech pro plug and play

Have run into this issue in the past with s1 rb lol exact same issues.

If you can get your hand in a stock ecu plug it in see if it will fire.

That's what it ended up being for me the ecu buggered out on me.

Checked fuses ?

perzn_34 Experienced

perzn_34

Posted
  • Author
Posted

Have run into this issue in the past with s1 rb lol exact same issues.

If you can get your hand in a stock ecu plug it in see if it will fire.

That's what it ended up being for me the ecu buggered out on me.

Checked fuses ?

I couldnt find any relevant fuses. The ones in the boot are just for lights etc the engine bay fuse box any particular one i need to check?

ill hookup the stock ecu tonight hopefully not that as I like my haltech :(

Cyifly Community Regular

Cyifly

Posted
Posted

I couldnt find any relevant fuses. The ones in the boot are just for lights etc the engine bay fuse box any particular one i need to check?

ill hookup the stock ecu tonight hopefully not that as I like my haltech :(

I'd check the fuses in the engine bag again..

In particular anything related to engine cont... Or fuel pump related .

Can you smell fuel as in is it definitely getting fuel when cranking ?

perzn_34 Experienced

perzn_34

Posted
  • Author
Posted

My battery is fine.. but I know I dont have spark.. I can hear the fuel pump and the fuel hoses have fuel in them but not sure if injectors are actually injecting or not. Anyway to find out? Cant really smell fuel

GTScotT Grand Master

GTScotT

Posted
Posted

As said did you forget to reconnect the earths?

Are you sure you have enough battery voltage?

It is very common for aftermarket ECU's not to pulse ignition drivers when they have low voltage. Sounds simple regardless of what it ends up being.

hypergear Grand Master

hypergear

Posted
Posted

There is a ignition coil distributor in the S1 skylines. Check the wiring on that and make sure this part is working. I had same problem few years ago and that turned out to be the issue.

RandomHero83 Veteran

RandomHero83

Posted
Posted

There is a ignition coil distributor in the S1 skylines. Check the wiring on that and make sure this part is working. I had same problem few years ago and that turned out to be the issue.

+1 coil pack ignitor on S1's fail easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Rear subframe stay bracket bolt removal issues

      By MBS206 · Posted

      TBH, it sounds like the threads on the bolt are fubar in a specific section. Most likely as you've been working it back and forth it has torn threads out, as you loosen the bolt, this section enters the nut, now you're spinning a round shaft inside the nut, there's no threads here.   Use something similar to a claw on a hammer that will fit either side of the bolt head and try to apply downward force while also undoing it. The idea is to attempt to catch a thread, or just rip the f**ker out. Caution on ripping out, as it could bend/maime/mangle what the captive nut attaches to. If the captive nut is actually okay, you could do the dirty part of cutting the head off the bolt, then cut a slit in the end of the thread that's now exposed and then screw it up and into the area the captive nut is until it falls out the other side. However, this does risk the remainder of the bolt rusting over time and damaging near the captive nut and also making it rust. However, so can cutting pieces of panel work out to access this area if you don't reseal it properly.
    • MBS206
      Rb25 det nitto washer crank gear

      By MBS206 · Posted

      Well, every piece of information on that part when you track it back to Nitto says it's for a KIT of theirs. It is also designed thicker to be stronger. And they speak about a specific harmonic balancer bolt they supply for the whole setup.
    • MrStabby
      Rear subframe stay bracket bolt removal issues

      By MrStabby · Posted

      Techniques for removing stuck bolts are: hitting the bolt head with a hammer, heating the bolt to red hot then letting it cool and working it back and forth like you are already doing. AFAIK the idea is to try to crush whatever material is stuck between the threads (and heat also melts locktite but that's almost certainly not relevant in this case).
    • GTSBoy
      Rb25 det nitto washer crank gear

      By GTSBoy · Posted

      Yuh, I think it works with the Nitto gear only. I presume that you're not also using the Nitto gear? Watch the video. Compare the interface between the Nitto gear and washer (on the gear side) vs the stocker and decide if you think the Nitto gear is different from stock there.
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Liking the new charger, battery all good (I think).   Also like how you can put it in power supply mode too. Will troubleshoot with that sometime soon.
×
×
  • Create New...