Jump to content
SAU Community

Recommended Posts

Solar powered?

No?

Wires.

Wireless is a lie.

I say this, cos i think you might want wireless, so you dont have to hack into your cars wiring harness.

Which is understandable for an m35 (thats new isnt it?)

Edit: Camera needs power from back there somewhere, and you need a reverse sensor wire.

Edited by D.I.Y. Mik

You still have to splice into the harness at the reverse light for the camera power and at the shifter for the reverse trigger switch.

There is a sender and receiver, so you don't have to run the wires through the length of the car..... Check them out... Heaps on eBay.

Reason for me wanting to go with wireless is-it seem really difficult to run wires through the tail/hatch door. All the skins and top half are bonded together with what looks like urethane.

Thanks

Justin.

Yes fitted one in my son's Patrol.

Got it from Jaycar but there's other cheap models around these days.

Repco were recently selling one for around $100.

Easy to install, the monitor clipped over the rear view mirror and just needed power which was easy to find via the convenient overhead lights.

The camera's wireless unit also needed power plus the reverse light signal which we had down at the rear of the Patrol so then it was just a matter of mounting and adjusting the camera.

Worked well AND when you grab reverse at the servo, you pick up their in-store cameras.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
    • Uniclutch install vid, RB Track edition.   Highlight reel is very drive able, not noisy but still heavy with the clutch master he has.      
×
×
  • Create New...