Jump to content
SAU Community

Recommended Posts

  • 4 months later...

In the 32, it's in the same place (as the 33). Little silver canister, about 4cm diameter. Follow the fuel lines back from where they connect to the fuel rail.

The filter can be a bugger to remove, because the hoses "weld" onto the the metal piping. I've found the simplest way is to grab the fitting with vice-grips and twist the filter to break the seal.

ok. i took some photos. is this it?

i bought a valvoline vf6 = z200 fuel filter. is that the right one?

from the pictures, it looks like the top part is bent? while my new filter is just straight? I might have bought the wrong filter....

thanks to anyone who helps...

i got a nissan one it has a bent nipple fits fine, its under the manifold near the firewall absolute bitch of a position , kills your hands, and my fuel lines had got all old and hard and they refused to come off. goodluck

ok. i took some photos. is this it?

i bought a valvoline vf6 = z200 fuel filter.  is that the right one?

from the pictures, it looks like the top part is bent? while my new filter is just straight?  I might have bought the wrong filter....

thanks to anyone who helps...

Yep, that's the little bugger. The Z200 will probably work, but I would check if you can get the correct one first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...