Jump to content
SAU Community

Recommended Posts

G'Day

My R33 is due for a service and I'm trying to compile a checklist of what needs doing.

I have owned the car for 4 years regularly changing oil filters,oil,air cleaner and flushing the radiator,the Rb25det currently has platinum iridium plugs and the motor was rebuilt from scratch about 70,000kms.

I was wondering how essential the following are to change if they haven't been in 4 years.

Diff oil

Gearbox oil

Fuel Filter

Brake fluid

If anyone could help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/433114-r33rb25-servicing-checklist/
Share on other sites

I change my fuel filter every year, at the same time I also inspect fuel hose and clamps and replace as necessary. If you don't know how long the other oils have been in there, have they ever been replaced? or how hard the car has been driven???? then you have reason enough to change them.

I think it varies greatly depending on use

I give it a complete/full service when I buy a vehicle if I don't have proof of when what work was done.

If it's been 4yrs I would do all. I do the fuel filter and brake fluid yearly if it needs it or not.

If your tracking your skyline then you would do the brake fluid after a number of track days or when you boil it.

Diff oil and gearbox oil being in sealed/airtight units - not often. Although depends on temp, contaminants like moisture or particles.

Thoughts will vary on these. You could work off the cars servicing manual and/or the manufacturers life expectancy as a general rule.

Personally IMHO, if it's your daily every 5-7yrs depending on the number of KM's you put on it each year.

also depends what oils have been put in the diff n gearbox prior and what you want from it.

If they were just standard oils then id go for full syn's to treat them with as much love as possible and keep them performing as highly as possible for as long as possible. Especially if you have rebuilt the motor.

Iv not met a skyline owner who didn't say that the gearbox and diff felt immensely better after a change and use of a very good fully syn that's tried and tested for these cars.

Cheers guys, I have enough reason to change them as I like to keep good care of my cars.

I'll put a fully synthetic oil in next - any recommendations on what brand syn is the best?

My mate was telling me that Mobil 1 isn't the best for engine oil any more and it's got me thinking, I've been running Mobil 1 for years.

My car isn't track or daily I have a work car and another dato I drive most of the time, I like to keep the kms low on the skizza.

I will be sure to check the fuel line whilst I'm at it.

Really the difference between fully synthetic oils only matters when you are tracking or running some really high power etc etc.

Otherwise mobil 1 is fine if a bit overpriced for what the product appears to be these days and in comparison to the competition.

I use Castrol Edge titanium 10-40. Good oil, often comes up on special at repco etc.

Im using the Castrol fully synthetic gearbox oil and diff oil too. Works really good and certainly improved the feel of both.

mine is 93 GTST with 170k on it and the box still shifts smoothly and the diff locks up well.

I can remember the names of them exactly but look it up in the oils thread n you will sus it.

  • Like 1

Really the difference between fully synthetic oils only matters when you are tracking or running some really high power etc etc.

Otherwise mobil 1 is fine if a bit overpriced for what the product appears to be these days and in comparison to the competition.

I use Castrol Edge titanium 10-40. Good oil, often comes up on special at repco etc.

Im using the Castrol fully synthetic gearbox oil and diff oil too. Works really good and certainly improved the feel of both.

mine is 93 GTST with 170k on it and the box still shifts smoothly and the diff locks up well.

I can remember the names of them exactly but look it up in the oils thread n you will sus it.

That would be great mine is a 93 GTST with 140k the diff and gear box are as old as the car. I have heard Castrol are the best but everyone has there own opinion, I know from a bloke at work they use Castrol in his $80,000 VW R

they are strong bits of kit if they are well maintained and not abused.

and yeah, fully syns are only used if you want the highest performance and longevity in a part. otherwise for most OEM they don't bother. Ur mum driving down the shops n to work doesn't need fully syn, it just wont make a difference except in price.

Iv got 320hp atw pumping through it and I use it as often as I can including some track work. So she gets the fully syn :)

I think it varies greatly depending on use

I give it a complete/full service when I buy a vehicle if I don't have proof of when what work was done.

 

If it's been 4yrs I would do all. I do the fuel filter and brake fluid yearly if it needs it or not.

If your tracking your skyline then you would do the brake fluid after a number of track days or when you boil it.

 

Diff oil and gearbox oil being in sealed/airtight units - not often. Although depends on temp, contaminants like moisture or particles.

Thoughts will vary on these. You could work off the cars servicing manual and/or the manufacturers life expectancy as a general rule.

Personally IMHO, if it's your daily every 5-7yrs depending on the number of KM's you put on it each year.

They arent air tight. Both have breathers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...