Jump to content
SAU Community

Recommended Posts

Still can't agree with you in that respect. One must look at the position in the present time frame and not the pre-historic.

Oh, so going by your criteria, Honda and Renault are useless in F1 as well as Subaru in WRC. Toyota must suck in JGTC too, as they haven't won it since 1999. How about that Nissan @ LeMans...?

Why do they bother, the useless pricks...?

I don't know whether you have or not, but i would encourage you to read up on Cosworth a little and appreciate their involvement in motorsport in the past 4-5 decades. Can you name me one manufacturer that competed in F1, ChampCar, WRC, Nascar and even MotoGP as well as over a handful other motorsport categories.

I am not trying to convert you to become a Cosworth fan here, but making the point that they deserve a lot more credit than they get on this board. Just because they've been involved with Ford for a number of decades and currently owned by Ford may give the impression that they are rather dull and pathetic. You, yourself admitted to this.

The fact is, their engineering, design and build are exceptional and they have the facilities that many others don't.

Consider that Cosworth produces engines for 3 manufacturers from an accounting perspective. There are no two teams on the grid with the same engine in F1 today. Therefor it recieves thrice the revenue. My OPINION is that most engine manufacturers spend more money on r&d than on direct material costs. Therefor instead of spending minor r&d on three engines wouldn't it be beneficial to make one engine? and delivering at the same or a minor increment in price to the 3 manufacturers? maybe they lack the resources in this era which makes them a BUDGET and LESSER manufacturer!

I don't claim to know anything about the accounting side of Cosworth, but what you are saying does not make sense. Most of the R&D is done on the Jag engine and i'd doubt if there is any current R&D in Minardi's one. They are using an older engine which makes further R&D on it rather pointless. They don't collect thrice the revenue of Ferrari for their engine program, their revenue is tied with the supported teams' budgets. They do have a less budget than Ferrari, BMW and Toyota's engine department but this doen't make them a lesser manufacturer.

Your argument is based on speculation.

I believe that Jag are getting the most out of their package, but can not go further with a useless engine!

Now, this is a ridiculous comment.

Mate, it's allright to have an opinion, but i just have to ask :

What exactly are you basing that opinion on...? Is it a gut feeling...?

It is well publicised that chassis, suspension and aerodynamics of the R5 is still under development. Even Michelin have tons of work to do, in order to catch up with Bridgestone. Considering you said "Im fairly certain that Jag uses the CR6, proven to be the only reliable component of the car for Webber " earlier on, i'd have to say that you're just contradicting yourself.

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Oh, so going by your criteria, Honda and Renault are useless in F1 as well as Subaru in WRC. Toyota must suck in JGTC too, as they haven't won it since 1999. How about that Nissan @ LeMans...?

Why do they bother, the useless pricks...?

loll u are just confusing youself here......once again Ill remind you we are talking about present and not the past. Honda and renault are doing well now. Although recall when Fisichella was driving for them?

I don't know whether you have or not, but i would encourage you to read up on Cosworth a little and appreciate their involvement in motorsport in the past 4-5 decades. Can you name me one manufacturer that competed in F1, ChampCar, WRC, Nascar and even MotoGP as well as over a handful other motorsport categories.

We are debating on the effects of the Cosworth engine in F1 TODAY, whats it got to do with appreciation of their competition other forms of motorsport?. I appreciate their involvement but I can not admit that they are supplying a decent engine to Jag.

[

Now, this is a ridiculous comment.

Mate, it's allright to have an opinion, but i just have to ask :

What exactly are you basing that opinion on...? Is it a gut feeling...?

It is well publicised that chassis, suspension and aerodynamics of the R5 is still under development. Even Michelin have tons of work to do, in order to catch up with Bridgestone. Considering you said "Im fairly certain that Jag uses the CR6, proven to be the only reliable component of the car for Webber " earlier on, i'd have to say that you're just contradicting yourself.

Im not sure if your just not mentally capable of comprehending simple statements or you just have to rebut every statement I make. Reliability has nothing to do with performance. I advise you to read a dictionary.

I am not sure if you are aware but every component is being developed in every car every week. Notice last year how Williams didn't fare well until Monte Carlo, next thing you know they almost claimed the title. Its not a co-incidence, every car in F1 is further developed during the year not only in off season.

Im just saying that their engine has been the most reliable part of Webber's car thus far. He's had plenty of other failures non engine related even though they may excel performance.

Heh… I think you are the confused one here mate.

You’ve made a generalized, stereotypic comment about americans being useless pricks , re : Cosworth.

2weeks down the track, you are still trying to defend it by making ridiculous statements to support your argument.

We are debating on the effects of the Cosworth engine in F1 TODAY, whats it got to do with appreciation of their competition other forms of motorsport?.

YOU are debating that issue, because it blends in nicely with your argument.

I put it to you that, you can't judge a team's (or a nation's) worthy performance by their results in a single calendar year.

Im not sure if your just not mentally capable of comprehending simple statements or you just have to rebut every statement I make. Reliability has nothing to do with performance. I advise you to read a dictionary.

What a condescending attitude you have !

Let me explain it to you.

In one statement you are branding Cosworth as the only reliable component for Jag; in another, you are saying Cosworth is the only thing holding Jag back. If that is not contadictrary, i don't know what is.

Obviously, in your mind, having 2 rookie drivers and a new tyre manufacturer on board, do not have much to do with things. The team performs admirably in all areas but the engine holds them back. Is that because, americans are useless pricks...?

You still need to learn the difference between reliability and performance. Once again, dictionary would be an adviseable source. Ill give you a head start....

Think of it this way, the engine is reliable (learn meaning) yet lacks performance (learn meaning). The other components of the car lack reliablity but excel in performance.

Please read, then re-read and then re-re-read the above statement until you comprehend it, since it obviously takes you long.

I put it to you that, you can't judge a team's (or a nation's) worthy performance by their results in a single calendar year.

agreed, tell me the highlight of cosworth's performance with Jaguar over the last three years (since this how I base the credebility of teams)?

It's a very simple arguement so avoid drifting from the topic.

For engine internals, one can take an educated guess.

3.0 litres v10 - each piston is 300ml - with an average sized crown, say on an oversquare engine for max flow, I'd imagine it'd be 70-80mm?

The RB25/26 is 86mm.

The stroke would be 50mm?

Actually by my very crap back of serviette calcs, an 86mm bore with a 50mm stroke would make the a V10 of around 3.0 litres.

Given that the RB26 runs ~73mm stroke, I'd imagine a 50mm stroke or less would make for twice the RPM given sufficient materials and balancing.

T.

Your attitude is beginning to shit me !

I am aware of the meanings of reliability and performance.

The contradicting part of your statement is as follows : There has been 9 races in F1 this year, Webber's car did not finish 5 times out of 9 and only one of them is engine related. From the remaining 4 races he finished in the points twice. How does a reliable component of a racing team, hold them back from getting into the points ? Webber qualified second in Malaysia, (a tightish circuit with two long straights) not a bad effort with a useless engine. ;) There is a lot of work to be done at Jaguar for them to be competitive and if I was the man running the team, I would concentrate on the unreliable components first.

Do you hold a position in the Jaguar racing team...? Where is your judgement of "every other component of the car except the Cosworth engine excel in performance" coming from...? How are you able to come to that conclusion, i'd love to know.

Refer to post 34 for my answer on Cosworth's achievements. It's clear that I don't agree with the way you base a team's credibility, so why are you trying to fish out the same answer from me...? In 1999, Cosworth supposedly had the most powerful engine in F1 supplying the Stewart team, during Ford's first year of ownership. 5 years down the track, they are not fairing so well, but they are far from useless. They do have a lot on their plate and maybe Ford is holding back on some decent funding till the team proves that they are able to tango with the best.

Your attitude is beginning to shit me !

The feeling is mutual

Undoubtably Webber is an excellent driver. Although, you failed to mention what actually happened at the BEGINNING and duration of the Malasian race. Engine as usual wasn't a problem since its reliable, although some component in the launch failed, hence unreliable. My point being whats the point of having a reliable engine if it is not competitive, as in the case of Minardi! Although it does come in handy when scavanging points as in the Indianapolis GP (Zolts)

For any manufacturer to enter F1 the ultimate in motorsport is a mamoth achievement. Having said that, Cosworth are providing the least best engine of the 10 teams (7 excluding JAG, Jordan, Minardi). Its as simple as that.

When one would say "Hawthorn is crap", it is obvious that the players constitute of very good skills yet they are performing the worst out of the rest of the teams.

as for the rest of the post.....off-topic as usual....loll

really becoming repetitive

How is a reliable but useless engine able to power the Jag to second fastest time in qualifying...? All credit can not got to Webber surely.

Talking about off-topic, you seem to weave around quite well yourself and address the points that suits you.

When one would say "Hawthorn is crap", it is obvious that the players constitute of very good skills yet they are performing the worst out of the rest of the teams.

WTF does that supposed to mean...? Are you contradicting yourself again...?

There must be one crap player in there to resemble Cosworth surely.

Whose fault is it that the team is not performing...? Is there just that one single player holding Hawthorn back...?

Go on leave most of the questions un-answered and crap on about how bad Cosworth is doing in the pasr three years. (since this how YOU base the credebility of teams)

Just randomly quoteing my points doesn't automatically mean you have found a contradiction, it's easy to quote 4 or 5 points and say there are contradictions without explaining VALIDLY. READING and COMPREHENDING would be a good tool to assist you in this concern.

I am referring to the whole team in that context and not individual players, therefor I am relating it to Cosworth and not Jag. Since its difficult for you to interpret the meaning unambiguously I'll explain once again. To enter your football team in AFL you must be competitive, therefor in that context Hawthorn is a good enough team to get into the level of AFL. Yet to be competitive in AFL they must excel over the other teams, which they are lacking at the moment.......If you can not comprehend this I really advise you go back to school.

This is becoming hilarious, we have a linguistic expert at hand now.

If you are relating Hawthorn FC to Cosworth, you have to understand that Cosworth are not competing on their own in F1. Their success is directly tied with the performance of all other components within the Jaguar Racing Team. You are faced with a similar situation at Sauber, they are using the current Ferrari engine and gearbox which is the best in the competition, yet they sorely lack the success of Ferrari Racing Team.

Which brings up the same question again :

Do you hold a position in the Jaguar racing team...? Where is your judgement of "every other component of the car except the Cosworth engine excel in performance" coming from...? How are you able to come to that conclusion, i'd love to know.

Ofcoarse, but I mean you can't deny it. Disregarding reliabilty issues, Jag would still be held back due to their egine.

"every other component of the car except the Cosworth engine excel in performance" is a general statement. I should have rephrased "every" with "most". Strightline speed is a good indication of the lack of performance of the Cosworth even though aero plays a role in straightline speed.

Heres some pics people might be interested in:

f1power.gif

user posted image

user posted image

user posted image

user posted image

user posted image

All above are from the Ferrari 049 engine (year 2002).

Some features of the pistons & rods:

*Very thin rings

*The oil feed to the gudgeon pin goes up through the centre of the rod.

*The rod is for a V type block, in the 5th photo you can see that the rod material around the main bearing goes right down to the bearing, but on the other side (most of the other photos) there's a large 45° angle, which is for crank radius clearance.

*96mm bore x 41.4mm stroke

*119mm long conrod, centre to centre

*Rod/stroke ratio of 2.87:1 (!!!! A typical road engine is more like 1.7:1 or so)

*19mm gudgeon pin dia

*42-43mm big-end bearing dia

*~40mm dia inlet valves

*34-38mm dia exhaust valve

*The rods are titanium, coated to stop reactions.

*The rod bolts are probably made from the most exotic material out of all the parts shown

  • 2 months later...

Hey guys, sorry this is a bit off the topic but i have always wanted to Know the majour difference between Indy cars and formula one cars. I hear conflicting things that the indya cars are quicker on a straight line but the F1 car will kill it on the track. the indy cars are turbo charged? correct me if im wrong and they use ethanol as fuel. So whats the majour differnce power and performance?

Cosworth has the best engine in champ car ;) jeeez who cares it all comes down to money which is why ford pulled out! they werent commited. Coswroth for what their budget is are brilliant F1 engines

and those power figures are BS

thanks for the links emre. Wow the champ cars and the the F1 cars are very even when it comes to performance. Except a F1 car weighs a little less. High reving N/A 10 vs Massively boosted Turbo V8. would love to see a 1/4 mile drag between these 2 machines. I saw the tape of Shcuey go agaisnt a French jet fighter and he lost 2- 1. its unbeivable that he managed to pull a win!

Hey guys, sorry this is a bit off the topic but i have always wanted to Know the majour difference between Indy cars and formula one cars. I hear conflicting things that the indya cars are quicker on a straight line but the F1 car will kill it on the track. the indy cars are turbo charged? correct me if im wrong and they use ethanol as fuel. So whats the majour differnce power and performance?

F1 and Champ cars race on circuite de gilles villeneuve in canada, with F1 cars being 9 or 10 seconds faster around the track.

DSKYLINE2C you obvioulsy dont know much about F1 if you think jaguars woes all come down to the engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...