Jump to content
SAU Community

Recommended Posts

post-65459-0-96578500-1381407394_thumb.jpg550RWHP - 340KW AT ALL 4 R32 GTR selling my R32 GTR very quick car, reliable, and has further potential. the engine was rebuilt by previous owner, with all work done by ADVAN perfomance in sydney, and i have had about $15000 worth of work done at CNJ motorsport in underwood QLD. i have receipts for all of the work i have had done and from the previous owner. mods include. engine - crank balanced and micro polished arp rod bolts rods unknown? trust 8.6:1 compression forged pistons upgraded valve springs trust 272 deg cams trust adjustable cam gears trust 8L sump extension and 26 row oil cooler and relocated oil filter custom catch can alloy radiator full trust T78-33D Turbo kit 6BOOST steampipe manifold trust drag spec 115mm thick intercooler kit trust 4'' drag spec exhaust trust type r blow off valve splitfire coils trust pod filter in custom alloy airbox fuel system consists of a surge tank and twin bosch 044's in the boot with braided hose running to the engine with an alloy rail, sard fuel reg and 880cc seimens deka injectors. battery is an odyssey item located in the boot in a custom alloy holder along with the pumps and surge tank. drivetrain, suspension - custom exedy twin plate 1000hp clutch r33 gtr vspec gearbox TEIN coilovers trust strut tower braces front and rear wheels and brakes - WORK xd9 gunmetal 18x10 +17 NITTO nt05 275/35/18 tires in good condition slotted dba rotors and track spec pads body - garage saurus style fibreglass front lip standard gtr kit everywhere else with the rear wing removed bonnet lifted with washers to let turbo heat blow through paint in pretty good condition with only a few little scratches which have been touched up electrics and interior - Autronic SM3 ecu apexi electronic boost controller 4wd controller a large array of trust guages to keep an eye on engine vitals kenwood head unit 2 sets of pioneer splits and an alpine sub with 2 amps

asking $26000

contact Ben on 0413853519

or email benjaminfoster@bigpond.com

car located in woodburn

northern nsw near Ballina

or hour and a half south of the gold coast

post-65459-0-54102800-1381406142_thumb.jpgpost-65459-0-10568600-1381406153_thumb.jpgpost-65459-0-81701300-1381406166_thumb.jpgpost-65459-0-51334800-1381406198_thumb.jpgpost-65459-0-99439200-1381406231_thumb.jpgpost-65459-0-54570000-1381406315_thumb.jpgpost-65459-0-03238500-1381406367_thumb.jpgpost-65459-0-88254000-1381406377_thumb.jpgpost-65459-0-02986100-1381406395_thumb.jpgpost-65459-0-97990700-1381406412_thumb.jpgpost-65459-0-68561100-1381406427_thumb.jpgpost-65459-0-63984600-1381406441_thumb.jpgpost-65459-0-69492400-1381406469_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...

. Would you be interested in swap for 2005 bf xr6 turbo. Has 320rwkw, 6 speed sports shift auto, clean, has almost 150000km comes with spool rods, cp pistons, arp studs, big actuator. Has a full exhaust, valve springs, injectors, fuel pump, oil feed line, zip kit in gearbox for firmer shifts, DVD player installed but haven't made the appointment for it to be wired up yet, gauges on dash, plazman 800 cooler, hot side cold side pipping, currently running on 13psi. If motor is built (parts supplied) it will handle 1000hp claimed by spool. Vic rego until November

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201449
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201469
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

bonnet spacers mate for hot air to escape

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201486
Share on other sites

bonnet spacers mate for hot air to escape

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201581
Share on other sites

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Can actually see the spacers fine mate. You just need to look properly. To me looks like bit of washers used as spacers but can definitely see something there.

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7202063
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...