Jump to content
SAU Community

Recommended Posts

Read this thread - ultimate RB "pull hard" setup, make numbers in the range of GT35R peak power but spooling similar to the smaller GT30 range turbos:

http://www.skylinesaustralia.com/forums/topic/426059-forced-performance-hta-turbos/

+1 for lithiums post. HTA turbos are weapons and will give you the best of both worlds. Will give you 400rwkw and the same response as a gt3076.

You'd be mad not to have a look basically

I disagree with both these clowns :ph34r:

LOL kidden, HTA or GTFO!

Was just trying to be helpful, was Garrett based and a lot of people don't know there is a bigger world than Garrett who have been all but left in the dust. But point noted, I have meant to have given up on trying to be "helpful" on these forums - just got a brief burst of enthusiasm for this place after finally actually meeting some SAUers... as you were :action-smiley-069:

Asks about Garrett offerings, gets advice on every other manufacturer but... :P

Well technically Garrett make the turbos with the HTA wheel :P So sort of got it...

Was just trying to be helpful, was Garrett based and a lot of people don't know there is a bigger world than Garrett who have been all but left in the dust. But point noted, I have meant to have given up on trying to be "helpful" on these forums - just got a brief burst of enthusiasm for this place after finally actually meeting some SAUers... as you were :action-smiley-069:

Hhahah

I get the same thing.

Left in the dust is a little excessive, I love my GTX and the results are excellent imo. Keep your HTA fanboi speeches for the impressionable boys in the FP thread. Considering you all talk about them continuously I would find it hard to believe someone hasn't heard of FP, Precision or BW for that matter.

I think Garrett is still king of reliability in most peoples minds... for good reason. If that means they are a little slower in their design rollouts and test their turbo's for longer, I am all for it. I have a Precision 6766 on the bench at the moment, not sure I like how thin the compressor blades are. Hopefully they haven't gone too light weight just to beat the competition...

No need to sook about being 'helpful on these forums', everyone else is here for the same reason. If you don't like people having opinions that differ to yours, better stay off the interwebz.

Hi all

I read some comments here and it looks like people prefer GT30 for around 290-320rwkw power. GT30 will come on boost harder in the mid range. It looks like a more efficient option on paper.

One thing I don't understand is why would someone want harder pull in the mid range when it will create more problems with traction unless are on 3rd gear. I have rb25 with GT35 312rwkw and I have problems with traction on 2nd with 265s and shimmed diff. I've driven similar car but with a smaller turbo and it had even less traction.

Correct me if I'm wrong, since I'm new to this. If I floor it at ~3000rpm it will pull hard almost instantly and easily break the traction on a smaller GT30 turbo compared to GT35 which pulls from ~4500+ but has smoother transition from no boost to full boost.

I have read many threads about this but not many people are looking at it from this angle

Cheers

Hi all

I read some comments here and it looks like people prefer GT30 for around 290-320rwkw power. GT30 will come on boost harder in the mid range. It looks like a more efficient option on paper.

One thing I don't understand is why would someone want harder pull in the mid range when it will create more problems with traction unless are on 3rd gear. I have rb25 with GT35 312rwkw and I have problems with traction on 2nd with 265s and shimmed diff. I've driven similar car but with a smaller turbo and it had even less traction.

Correct me if I'm wrong, since I'm new to this. If I floor it at ~3000rpm it will pull hard almost instantly and easily break the traction on a smaller GT30 turbo compared to GT35 which pulls from ~4500+ but has smoother transition from no boost to full boost.

I have read many threads about this but not many people are looking at it from this angle

Cheers

You'll find your traction control switch at the end of your right leg; when traction starts to break, lift right leg slightly.

Also on most good ECU's you can do boost by gear and just have less boost in 1st and 2nd.

No reason you can't just lift off slightly though...

Maybe of interest, I found this helped with controlling boost on my car:

http://www.gktech.com/index.php/v2-s14a-s15-eccentric-throttle-wheel.html

It will work fine on an RB25DET. The standard wheel opened the throttle quite a lot with little pedal movement, where as the GKTECH one is the opposite, ie a smooth logarithmic opening of the throttle, where 50% pedal may only be 30% throttle opening. (not sure about exact numbers)

Its good for peaky responsive turbos.

the best action ive had was with a GTX3076, 4000rpm's = Hammer time, 1st and 2nd at WOT =Black lines layed for 50meters which is f#$k yeah feeling.. 3rd= hold on

If you can do this then you know you got a wild ride, the rest is up to you and the tyres, suspension and right foot control, but personally this has set the bar for me... and now disappointed with anything less :(

Go with the Gt35. They are the bomb diggity.

They also have plastic cage bearings afaik, where as the GTX has steel cage. Hence the reason the old diesel designed GT35's have a higher failure rate. It's one of the Garrett turbos I wouldn't recommend.

Go with the GTX3076 imo for a similar power figure and quicker spool.

the best action ive had was with a GTX3076, 4000rpm's = Hammer time, 1st and 2nd at WOT =Black lines layed for 50meters which is f#$k yeah feeling.. 3rd= hold on

If you can do this then you know you got a wild ride, the rest is up to you and the tyres, suspension and right foot control, but personally this has set the bar for me... and now disappointed with anything less :(

not wrong here. The GTX3076 is awsome fun. i love it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • When: 5 & 6 September 2025 Where: Sydney Motorsports Park Join SAU NSW at World Time Attack Challenge 2025 at Sydney Motorsport Park. Plans will be finalized closer to the day, but make sure you lock in the days in your calendar now!
    • When: 9th August 2025 Where: Meet details to follow, budget half a day for just the museum part of the cruise, or a full day if you want to come up the range with us after! Join us for a cruise to Albion Park to visit the Historical Aircraft Restoration Society Aviation Museum for their August open Tarmac weekend. Walk around the hangers and see these amazing classic aircraft up close. After a two hour break to look around you are welcome to join us in heading up Macquarie Pass to the Robertson Pie Shop for a bite to eat. After a bite we will head back down Jamberoo Mountain Road before returning to Sydney. Full details to follow, for now lock in the dates into your calendar!
    • This is a school night cruise! Join us for a mid week night cruise up the Old Pac. We will stop at McDonald’s in Gosford for a quick break then come back the same way. Date: Thursday, 26th June 2025 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: 7:30pm for a 8:00pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://maps.app.goo.gl/wi7jcuGxpJsoKtJB8 This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave.
    • Join us for an epic Saturday at JDM Festival! We'll kick things off with a feed at Big Fat Greek Campbelltown to fuel up with some delicious eats and good vibes. After the feast, we’ll cruise over to Sydney Motorsport Park for the main event: JDM Festival! Please note: space is limited and depends on the number of SAU NSW members who commit to attending. To help us plan accordingly, we appreciate your timely registration. Date: Saturday, 14th June 2025 Meet Location: Big Fat Greek, 2 Rennie Rd, Campbelltown NSW 2560 Meet Time: 2:30pm for a 5:00pm departure Destination: Sydney Motorsport Park, Ferrers Rd, Eastern Creek NSW 2766 Important Information: Spots are limited and will be allocated on a first-come, first-served basis, with priority given to current financial members. REGISTER YOUR INTEREST HERE This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • You'd want to cap off the re-entry back into the dump too. Just something flat that can be held on by the Vband.
×
×
  • Create New...