Jump to content
SAU Community

Recommended Posts

I'm about to boost my n/a 34. Intercooler etc is sorted and fab work.

Q1. Do rb25 turbos and rb20 turbos use the same oil lines ? Because I have a set of speedflow braided oil feed and return lines an I want to know if they will bolt straight into rb25 turbos.

Q2. How would an rb20/25 turbo go if I get it rebuilt with a billet wheel and high flowed with a kinugawa adj actuator ?

Q3. Cost vs cost, which is better ? ^ that or going straight out and buying a kinugawa TD06 20G ?

The plan is to only run around 10psi as the n/a motors have higher compression values then the 25det neos. To pair with this, I'm just going to run the factory low mount manifold with a 2.5" twin entry dump, greddy type FV BOV and drift boost tee.

What's my best option ? Cheers guys. Kinugawa TD06 or rebuilt rb20 or 25 turbo with billet wheel and kinugawa actuator ?

Link to comment
https://www.sau.com.au/forums/topic/433613-turbo-questions-and-help/
Share on other sites

Not much. Picked up a GREDDY FV BOV, permaseal gaskets, factory turbo manifold, twin entry dump and boost tee for $180 and I already had speedflow braided oil feed and return lines.

Looking at $400 for a return flow cooler with piping, $1k for a nistune install and tune then I'm looking for an op6 turbo or something similar.

  • 3 weeks later...

Not much. Picked up a GREDDY FV BOV, permaseal gaskets, factory turbo manifold, twin entry dump and boost tee for $180 and I already had speedflow braided oil feed and return lines.

Looking at $400 for a return flow cooler with piping, $1k for a nistune install and tune then I'm looking for an op6 turbo or something similar.

You running factory non-det injectors and fuel pump?

If you're buying injectors and a fuel pump I'd sugest going straight for E85. its perfect for the higher comp motor and you will make more power on that small turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Updated with the latest <68mm Xona Rotor turbos.  The two XRA options are on paper some of the compressor performance I've seen 
    • You see R34 GTRs listed for 200-300k are they really selling for these prices? Kinda seems like the same ones listed all the time. Even with R33 GTSTs looking at gumtree. You have an auto with a bitsa interior for 35k. Another one needs an engine rebuild and asking 24k. And then you have a stock in better than average condition for 45k. Nobody is ever going to pay these prices.
    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
×
×
  • Create New...