Jump to content
SAU Community

R32 Gtr Random Stock Parts

CRZY32
 Share

Recommended Posts

CRZY32 Rising Star

CRZY32

Posted
Posted

Most items from my personal car (R32 GTR 93). All items located in Melbourne. Postage not included in prices.

PM or post here

Interior roof lining - Excellent condition. No damage. Pick up only - $60

IMG_7987_zpsbc4a49a1.jpg

GTR 32 front grille Good condition. Centre plastic clip missing $120
IMG_7991_zpsef06ae53.jpg
Top cowl cover Fits under front wipers. Excellent condition, no damage $70
IMG_7994_zps81ff4556.jpg
Interior carpet Good condition. No stains, no burns. 2 small cuts for harness bolts $240
IMG_7996_zps3b5d9710.jpg
Complete blower motor and fan assembly Working well. Part code 27220-85L00 $180
IMG_7998_zps112d01dd.jpg
Air conditioner cooling unit assembly Working well. Part code 27270-05U02 $450
IMG_7999_zpsb31613de.jpg
Heating unit assembly Working well. Part code 27110-04U01 $290
IMG_8000_zps461436e8.jpg
Rear seat firewall plate Avg condition. Some scratches. Pick up only $80
IMG_8008_zps590a7a2d.jpg
GTR floor mats Complete set. Avg condition, ususal wear, no holes $150 set
IMG_8009_zpsf63f3f45.jpg
Front door outside moulds (L&R) Poor condition. Suit painting. $40 pair
Rubber weather shields (L&R) Heavily worn but still working, no leaks. $50 pair
IMG_8011_zpsa9701d72.jpg
Weather strip retainers (L&R) Poor condition rubber strips, both suit restoring. Metal guides are excellent condition $180 pair
IMG_8012_zps5553d7e8.jpg
Rear seat belts Excellent condition. Barely used. Belts retracted into spool. Comes with fitting bolts $100 pair
IMG_8015_zps58ab4783.jpg
Interior roof lights (front & centre) Good condition. All working correclty. Centre light fitted with LEDs, so much brighter than stock. $20 each
IMG_8017_zps444b2b86.jpg
A-pillar trims (L&R) 3 small holes in drivers side for pod gauge fitting $40 pair
IMG_8023_zpscf1f23c3.jpg
Interior rear side trims (L&R) Excellent condition. All clips in tact, no tears in vinyl. Marks in photos from storage, not permanent $120 pair
IMG_8024_zps4f34721c.jpg
IMG_8025_zps0e9e8903.jpg
IMG_8026_zpsfd2f620c.jpg
IMG_8027_zpse2f69bf4.jpg
Rear parcel shelf (original) Good condition $40
IMG_8028_zpsa3a52da9.jpg
Boot trim, carpet, and board Good condition. Left side trim torn slightly. Holes cut in side trims for struct tower bar. Selling as set $45 set
IMG_8029_zps2f51efdb.jpg
Rear seat (back and bottom) Excellent condition. No holes, tears, stains. $280
IMG_8030_zpsf8877b61.jpg
Air con compressor, bracket, gas cylinder, and hose Good working order $140
IMG_8031_zps0f43beb6.jpg
Original Nissan brake lines and used Bendix pads $40
Rear window wiper Needs paint touch up $25
Child anchor points and brackets Fitted onto rear parcel shelf during compliance process $20
Nissan spare jack (original) Avg condition $25
Nissan standard CAM gears Excellent condition $40
RB26DETT oil air breathers and joins $30
Transfer case from R33 GTR Working order. Pickup only $220
Under bonnet trim Avg condition. No damage, just needs a clean. $25
Rear window lower moulding Good condition, no damage. $55
Sun visors (L&R) Avg condition. Need a clean. $25 pair
Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
    • alexburns
      Stagea Dash Multimeter

      By alexburns · Posted

      @johnnysr22 did you end up installing the little screen thingy and did it work ?>   
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
×
×
  • Create New...