Hks Evc-5 Setting Up

[seventhirteen]

Hey guys, jusy wondering if anyone could help me set up my boost controller

So the car in question is a r32 gtr and I bought the car with this already installed and not quite sure if its even working correctly.

So I looked up a manual online and I set it up as per the manual. I first set the boost limit at 113 kpa (in kpa is quite annoying) which is about 15 psi. Then I set up setting A at 50 kpa for a low boost setting of around 8 psi. Then set up B to 100 kpa of around 14 psi. So then I go to test the settings and this is where I think I havnt gotten it right. Setting A will easily go past 50 kpa. Ive seen it hit almost 80 on low gears. Setting B will even hit 118 kpa! Over my safe set limit.

So if anyone could help me out any information would be appreciated

Thank you

Edited October 23, 2013 by seventhirteen

[Dose Pipe Sutututu]

reduce your gain, this will reduce the spike

[seventhirteen]

Does anyone know how to set the gain?

Also just another question. Does anyone know what actuator spring GTRs use? The evc needs to be set the right one and just wanted to clarify. Its on swing valve at the moment.

Edited October 25, 2013 by seventhirteen

[Dose Pipe Sutututu]

It's one menu in, tap the middle button once. You'll see a circular graph, that's your gain and on the previous screen is where you set the targeted pressure.

I suggest you read the manual or pay me a slab of beer and I'll set it to whatever you want lol