Jump to content
SAU Community

Recommended Posts

I recently had a Nistune ECU (w/ Z32) tuned on my R33 S2. Mods are minor: 3" TB exhaust, FMIC and r32 actuator (11psi).

From drive in to drive out I gained a measly 10kw atw. Does this sound about right to anyone who has similar mods? I'm not concerned with the overall power output as I understand every engine is different, but I thought the gain would've been closer to 20kw. Would it be worth chasing another tuner to look at it again or hope that Toshi comes down to Melbourne to have a look? ;)

Link to comment
https://www.sau.com.au/forums/topic/433897-nistune-ecu-gains/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Maybe. Depends on what your mixtures and timing were like before, and what they're like now. If your fuel pump is not real good, and so your high load/rev mixtures were not as rich as the factory maps wanted them to be, then it would have been making more power than a std R33 should straight off. Also means that the available gains from tuning are eroded. If your tuner has not leaned on the timing as hard as he could (safely) do, then you might not have gained as much from extra timing in the top end as you might either.

You did not provide enough information in your post to be able to get much more specific than that. There are probably also a few other reasons why it didn't get better, from a collapsed cat to a rag in the intercooler pipe or weak coils, etc etc.

Well as soon as I bought my 32.. I took it for a tune & nistune chip

Gained about 55kw and 89nm torque.

-T04e high-mount

-full through 3inch exhaust

-FMIC

Not exactly a like for like with an 04 lol

I recently had a Nistune ECU (w/ Z32) tuned on my R33 S2. Mods are minor: 3" TB exhaust, FMIC and r32 actuator (11psi).

From drive in to drive out I gained a measly 10kw atw. Does this sound about right to anyone who has similar mods? I'm not concerned with the overall power output as I understand every engine is different, but I thought the gain would've been closer to 20kw. Would it be worth chasing another tuner to look at it again or hope that Toshi comes down to Melbourne to have a look? ;)

sounds bout right to me, with same mods as you, I had a power fc installed and it made bout 10-15kw's more, and it was running very rich with stock computer..

Wouldn't expect too much from just a tune. But scope is there now for boost increase and further mods down the track.

Agree with this^

For a budget upgrade Add -> Injectors, Fuel Pump and High flow Turbo. Should net another 50+ rwkws

Edited by Sinista32

DO you honesty think Nissan f**ked the factory tune up so bad that you could make more than a few killerwasps extra?

Well, depending on which engine and ECU we're talking about.....yeah. R33 RB25DET ECU is so full of ghey in the upper right corner of the fuel and timing maps that just getting rid of all the extra fuel and putting some timing in it can be worth 20 rwkW at more or less the same boost. More or less the same with Neo. In both cases, you get a double benefit from being able to push the boost up a pound or two more than you can even think about running on the standard tune. So there's even more power available from that, and that is a direct response to the "Nissan f**ked factory tune" in both cases. Nissan went very conservative on those tunes. On an RB20 it wasn't quite so severe. You could run them at 13 or 14 psi on the standard tune and so you only gain a bit of extra power from leaning them out a little and adding timing, both of which were not quite as conservative on the factory tune as the later engines.

You still haven't told us what it made?

The biggest thing I noticed about getting my car tuned for the first time wasn't the power, it was the drive-ability. The car was a lot smoother and nippier than it was with the factory tune. I wouldn't get too hung up about the number, especially when it's dyno vs dyno and only 10kw difference.

Before tune it made 170kw and after it was 180kw. As I said I'm not fussed about the final output, I was more interested in the overall gain. This figure was made on the same dyno so it wasn't a dyno vs dyno comparison.

I was a bit annoyed about spending $1k = 10kw :P But I do agree with you, the car does feel a bit sharper.

Mine made 184kW after the tune (not sure what it was before tbh). Only mods are pod, exhaust from turbo back, and R34 SMIC, 9psi. So pretty much in line with yours really.

Oh, also seem to be getting much better fuel economy now. A welcome side benefit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • had 4 weeks off over xmas and well did some stuff to the shed and BRZ, well short of is I don't work full time in supercars anymore as of yesterday.........
    • Did you get any down time over Christmas, or have you had any since to play with this? Or have you given up and are trying to get yourself a second hand V8SC instead?
    • A random thought I had just before I hit "Submit on this post". If brake fluid, in a container in my garage that has never been opened goes bad after 18 months, why can I leave it in my car for 24 months in an "unsealed container"... Secondly, some other digging, and brake fluid manufacturers seem to be saying 5 year shelf life... Me thinks there line on 18 months for an unsealed bottle is pretty much horse shit marketing spin. Kind of like how if you drive a car and don't run a turbo timer your turbo and motor will die horribly...   Where I started on this though... Someone (me) started down a bit of a rabbit hole, I don't quite have the proper equipment to do Equilibrium Reflux boiling per the proper test standards. I did a little digging on YouTube, and this was the first video I found on someone attempting to "just boil it". This video isn't overly scientific, as we don't have a known reference for his test either. Inaccuracy in his equipment could have him reaching the 460 to 470f boiling point range in reality. In the video, using a laser temp gun, he claims his Dot3 that's been open in his florida garage for over a year gets to about 420 to 430 fahrenheit (215 to 221c) Doing some googling, I located an MSDS for that specific oil, and from new, it claims a dry boiling point of 460 to 470f. Unfortunately they don't list a wet boiling point for us to see how far it degraded toward its "wet" point. While watching it I was thinking "I wonder what the flash point is..." turns out its only 480f for that specific brake fluid....   As for testing the oil's resistance, I might not be able to accurately do that unfortunately. Resistance level will be quite a LOT higher than my system can read I suspect based on some research. However, I might be able to do it by measuring the current when I apply a specific voltage. I won't have an actual water % value, but I'll have some values I can compare between the multitude of fluids. I'll run some vague calculations later and see if I should be able to read any reliable amount of current. These calcs will be based on some values I've found for other oils, and see how close I'll need my terminals together. From memory I can get down to 1pA accuracy on the DMM. I don't think my IOT Power Tester has any better resolution.    
    • No, with a twin plate clutch flywheels and clutch pressure plate/friction disks go together. Only clutch where that isn't the case is the Uniclutch but they currently don't make a pull version for the Getrag R34, just some other cars. Personally the flywheel is as light as I'd want it to be. It already drops revs faster than I want to shift normally and I blip the throttle again to rev match on upshifts.
    • Are there any other lighter flywheels that can be used with nismo coppermix twinplate system? Id like to gave the revs pick up faster than oem
×
×
  • Create New...