Jump to content
SAU Community

Recommended Posts

Welcome.

Assuming you have R33 turbo boxes it seems strange you are blowing them chasing 'only' 330RWKW. I say 'only' as that is still a lot of power for a street car, just no where near the limit of those boxes.

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7079981
Share on other sites

Woops sorry, I assumed you had manual. Like Luke said swap to manual, cheaper than a built auto and more fun for a street car. Also manual is a plus if you decide to sell it in the future.

Lol, I have 2 of them one the exact same with minimal mods running manual, would be happy to make my modded one less streetable as it's not my daily and i'm sus on the 2nd gear set in the manual boxes from experience.

How strong are the manual box (clutch choice also dependant of course) and what sort of power figures have people been able to put through them?

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087704
Share on other sites

swap to manual.

or th400, or power glide.

Cheers, will do some more researching. Preference is always manual but it's still just as fun regardless what transmission is in it.

Just want some reliability without an 8k price tag.

Can pickup complete manual conversion for $1500 with good box tomorrow... But does that mean i'm going to be doing a clutch everytime I give it a bit of what for?

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087710
Share on other sites

Lol, I have 2 of them one the exact same with minimal mods running manual, would be happy to make my modded one less streetable as it's not my daily and i'm sus on the 2nd gear set in the manual boxes from experience.

How strong are the manual box (clutch choice also dependant of course) and what sort of power figures have people been able to put through them?

Here is a quote from the CT forum. There are a bunch of guys on their using the 33 boxes for drag racing.

"i have a wrecker spec box with a short shifter i only put oil in it because it was empty in the frame of mine its cheap lets break it then think about something different it did 4 years on the road running in the 11s @ 130ish mph at the track then another 2 years of drag only running 10s @ high 130mph with full slicks and 6800rpm two step launch and still all good. It has been through 2 blown clutches, 1 smashed centre bearing, 3 broken uni's, 1 pretzal tailshaft, 2 folded lower control arms and then 2 broken axles. I pulled it down thinking i should look at the damage NONE wasnt even fillings in the oil THEY ARE TUFF "

Look at getting a Jim Berry clutch if you are worried about it failing. Twin plate should be under $1500. He will talk you through it and let you know the best clutch for your application.

Link to comment
https://www.sau.com.au/forums/topic/433966-new-member/#findComment-7087746
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
×
×
  • Create New...