Jump to content
SAU Community

Recommended Posts

I HATE this too, and also those clowns that wait right up until their lane closes before they merge. Screw them, if I have enough courtesy to prepare myself to change lanes from 100m before it closes, what do they think makes them so f'king special? AggroDave and I were talking about this today from when I continually held off some clown on the M4 who thought he'd be able to merge in front of me, then got the shits when I wouldn't let him in.

Not that I would condone or endorse this behaviour, but I "may" have found that Maccas thickshakes on windscreens "might" provide a solution to this impatient driver cutting in problem. lol

Girls!!!
* Keep your fingernails well clipped on the hand that lifts the door handle
* No stilettos on the carpet
* Don't leave tissues behind on exiting
* Keep the LR wheel clear of the gutter; in fact both nearside ones
* Multitasking does not include drinking expresso, applying lippy and texting at the same time
* The mirror for applying lippy is under the passenger side visor - not whilst in the driver's side using the rear vision one

* Keep your mobile in your handbag - no FOMO
* Keep tabs on the fuel gauge - E does not mean exxy
* If you hear something flapping, I don't care if your skirt is too short, investigate
* If a light comes on in the dash, it's not meant to just look pretty
* A seat belt is not meant to be uncomfortable - it's a test of tolerance and compliance.
* If you're being driven, give your man enough time to get there without speeding or deviating through a Maccas
* Offer to pay for half the fuel - after all, the man is already footing time and money for maintenance
* Rub the man's neck and shoulders after a strenuous drive
* Don't nag whilst the man is driving - don't expect him to multitask like you 'can'
* When reversing, do a head count of the children
MALE COMMONSENSE has spoken!

  • Like 1

Not that I would condone or endorse this behaviour, but I "may" have found that Maccas thickshakes on windscreens "might" provide a solution to this impatient driver cutting in problem. lol

In theory, and purely as a hypothetical, would a can of Coke poured over paint work as well?

Waiting to turn left from a single lane road onto a multilane road. Two left lanes are empty, one car in right most lane. That one car in right most lane decides to move into the left most lane, causing you to wait even longer.

Dumb f**ks who don't know where to stop to turn their vehicle. i.e from a single lane road wanting to turn right, they sit in the left most of the lane EVEN THOUGH there is more than enough room for left turners to lean left and right turners to stay in the middle.

People who reverse in the middle of traffic because they cross the white line by 1cm.

People who tail gate when driving up steep ramps, e.g parramatta westfield carpark ramp.

People who beep their horns in drive at mcdonalds, starting a chain of beeping wankers. The beeping won't cook your food faster.

People who double park then open their doors and get angry at you when you drive past, in a single lane road.

People who put my windscreen wipers up

People who text at lights, people who text while driving

People using left lane must turn left or ending lanes to overtake waiting traffic. If I see you do this, I will block you. Prime example, westbound on parramatta road x james ruse drive T intersection.

People who you overtake for driving under the speed limit, then being overtaken by the same person doing 100km/h only to have them slow down infront of you again. Overtaking you isn't meant as an insult, its meant as a get the f**k out of the way.

People who give learner drivers the wrong advice from the get go.

This list could go on forever.

People who stop 3m behind the white line at a red light.

People (two or more different people), who park on a suburban street (say, maximum 2-3 lanes unmarked), on opposite sides of the road, right at the entrance of the road- thus creating a bottleneck in/out of the road - too lazy to park that extra 5m into their driveways (I found out they were too lazy because the morning after I left a thinly-veiled note on their windscreens, cars were magically parked in driveways/only on one side of the street - they had continued their previous behaviour for MONTHS prior, and now, not a single repeat).

People who get all road-ragey at you when THEY'RE the one in the wrong. Like the guy who felt the need to gesture out the window and swerve all over the road and point at the speed camera because I dared to come up behind him doing 80 in a 80 zone. He was doing 60. And no I didn't tailgate or anything.

Nothing makes me want to ram someone off the road, grab them by the throat, and explain to them why they're a f**kwit more. If I was the violent type. Which I'm not :P

This conversation has stayed with me as a reminder as to the calibre of people on the road.

After I nearly got wiped off the road by someone trying to merge on top of me we pull up to a set of lights, windows down.

Wat mate?

Me: it's called a blind spot, maybe you should check it sometime.

Him: if it's a blind spot, then how am I suppose to check it?

All I could do was laugh and shake my head in disbelief.

drive off, he then pulls into my lane and in front at the next set of lights. Then tries to fake reverse into me.... Sigh.

In car etiquette that drives me insane:

Jamming the passenger door into the ground then getting into the car, putting more weight on the side of the car and jamming the door deeper, then pulling hard just to get it unstuck. Extra nasty if the door is stuck against the concrete sidewalk

Dragging shoes and bags over the door sill plate, door trims and glove box lid while getting into the car

Jamming the seat belt buckle into the centre console since they can't be bothered looking where the clasp is

Playing with sun visors or power windows non stop

Dragging stuff over the boot loading lip or bumper bar while loading and unloading

Leaving windows partially open during rain

I hate passengers!

^ AHHAHAHAHA wow, who do you take in your car? Thank goodness most of my friends love their cars too, so take (relative) care when they get in mine. Also, my gf nearly cried once when she opened the door and it scraped on concrete - not her fault though because the sidewalk kerb was ridiculously shaped/sized/height. And she takes absolute care in the car, and putting stuff into the boot/taking it out. She knows I love the car...sometimes more than her :ph34r:

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...