Jump to content
SAU Community

Recommended Posts

Count me in. Sorry I didn't make it to the QR Happy Laps, had a big night the night before. I had already paid though so didn't think it would be a problem not showing up.

Lol! The number one reason I can't make things in the morning :P

Lol I wasn't going to stay out either. Just kept saying alright one more drink then I'll leave. Got to 4 a.m. and was just like alright, I think I'm definitely not going to Happy Laps :(

Anyway, keen as for Lakeside. Been looking forward to this for many months. Won't be going out the night before either!

  • 3 weeks later...
  • 2 weeks later...

I have attended a Torque time happy laps at QR,

and am doing the downshift one this weekend,

does that mean I am eligible ?

If so will the sound restriction be in place?

if all thats ok you can definitely count me in.

11. Members must have completed at least ONE QR Happy Laps before participating in a Lakeside session. (If you have done other Lakeside events before you may be eligible. PM me to clarify)

That rules me out. Looking forward to doing one of these happy lap things as I am a virgin to a track besides go karts.

11. Members must have completed at least ONE QR Happy Laps before participating in a Lakeside session. (If you have done other Lakeside events before you may be eligible. PM me to clarify)

That rules me out. Looking forward to doing one of these happy lap things as I am a virgin to a track besides go karts.

Our next session will be at QR so you can come to that one and get some experience in your car.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Does anyone know what the centreline should be for the vct intake cam? On my cam spec card it just says VARI and doesn’t actually tell me what the centreline should be. I had to adjust my exhaust cam gear by about 5 degrees advanced so I’m guessing I would have to adjust my intake as well? Current intake centreline is 119 deg. Iv already asked kelford and they won’t respond, It’s the 246-A 262 cams.  thanks for the help guys 
    • Get a timing light on it and verify it's sparking reliably at a sane ignition timing. Use a COP extension lead to be 100% sure about timing instead of hoping that the timing loop on the back of the engine is accurate. Make sure it's actually injecting fuel. MAF is not used on the stock ECUs for initial cranking.
    • RE5R01A is the transmission. Didn't realize they had a 5 speed for the NA cars but for some reason the turbo engines stuck to 4 speeds. Looks like the solenoid block is still available from Nissan directly at a somewhat reasonable price: 31940-60X01 https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/skyline/er33/6568-rb25de/trans/317 I would move sooner on this than later. The moment the de minimis exception for Japan goes away expect to be paying 25% tariffs even for stuff like this.
    • Only RB26 are low from factory. And even then the ECU actually want high impedance, because it's essentially the same ECU as the RB20 anyway, and thus they have a f**king resistor pack!
    • Is this preventable by priming the system with external oil pressure? I've seen the speed academy folks hook up an external oil priming system to the oil pressure sensor port with an air compressor to check for oil leaks before putting an engine back in a car. Something like this: https://www.jegs.com/i/JEGS/555/23550/10002/-1?gPromoCode=SPRINGINTOSPEED_APR25_5Off&gQT=1
×
×
  • Create New...