Jump to content
SAU Community

Recommended Posts

Im thinking of selling my 1995 r33gtr,non vspec.I purchased the car of Adam Neish of JEM fame.I purchased the car in early august with a view to do an occasional track day and weekend car.Due to a new house purchase I will be going to a property with a double garage,and thinking of selling this vehicle and my daily ride and going back to one car.

About the car,it is very clean silver vehicle,with carbon fibre wing insert,tinted windows,led taillights,clean xenon headlights.It is rolling on rare Rays SE37s in black,with brand new 265/352/18s federal rs-r semi slicks.Lowered with aftermarket springs and bilstein shocks,and various aftermarket bushes.

Standard bottom end,relocated oil filter,large greedy fdront mount and piping,750cc injs,turbosmart fuel reg,044 intank,quality high mount steam pipe manifold with Precision 6266 turbo,,unknown brand smallish cams,3'' manderal bent exhaust,ballistic 100cpi cat leading into nismo muffler with carbon tip.Haltech platinum pro looks after the tune.As you would expect the tune is absolutely spot on.

5 speed box is nice to use with heavy duty clutch.

Inside,very clean gtr interior with white face nismo dash and centre gauges,hks pillar mounted boost guage,blitz electronic boost control and blitz turbo timer.Aftermarket cd stereo with removable sub.

Have the dyno sheet,on low boost 18 psi 333.1kws at all 4 wheels and on 20psi tapering off to 19psi it makes 343kws or 460 hp.Adam has done a very safe tune and believes at this tune will last.

I have never taracked it but did race it once at wsid after having the car for 2 days,not knowing how to launch a 4wd car it ran 11.9 @ 119mph.with a slow 60ft time,should run 11.5s with a decent driver.

I do have brand new for it a set of 1000cc injs,arp head studs and walbro 460l/ph pump.We were going to do a e85 tune and shoot for 400kws at the wheels,but deceided not too.

Im looking for $22,500 for the car,and $23,000 with all the other bits injs,studs and pump.My number is 0410993105,and I will try and load some photos later on.

Link to comment
https://www.sau.com.au/forums/topic/434211-eoi-1995-r33-gtr460hpex-jem-car/
Share on other sites

post-117676-0-31312500-1383732344_thumb.jpgpost-117676-0-15140200-1383732380_thumb.jpgpost-117676-0-15619900-1383732403_thumb.jpgHave just listed the car on ebay and will also do carsales,some more pics.Have just done a carbon wrap bonet using avery Denison vinyl,can be removed.Listed it for $21,000,still hoping to get up near $22,500 with some extras,and some more pics.Call 0410993105
post-117676-0-31312500-1383732344_thumb.jpgpost-117676-0-15140200-1383732380_thumb.jpgpost-117676-0-15619900-1383732403_thumb.jpgHave just listed the car on ebay and will also do carsales,some more pics.Have just done a carbon wrap bonet using avery Denison vinyl,can be removed.Listed it for $21,000,still hoping to get up near $22,500 with some extras,and some more pics.Call 0410993105

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Clutch hydraulics are also all good, looks like a brand new slave cylinder and everything bled up well. No idea what the actual clutch is, and I don't intend to pull the box off on the floor to find out, so unless we have trouble on the dyno or at shakedown that will remain a mystery for the new owner
    • Front brakes are G4 8 pot calipers over 330mm discs with braided lines. Everything looks good, pretty sure these are off my old 350. Pads are brand new and judging from gold colour are Winmax which is what I also run on my race car, Neil and I both sourced brake stuff from Matty at Racebrakes Sydney who really knows his stuff Everything has bled up nicely with all new Motul RBF600 fluid, there were 2 loose hard line connections and the calipers were new on the car so I ended up doing it 3 times but it is perfect now
    • So, starting with the rear brakes. They look like standard R33 GTST, and will need new pads shortly (less than 5mm material, probably only 1 day left). The slotted discs (probably DBA) are near new at 18.01mm and the lines are braided
    • I clean my wheels every time I wash the car, I also clean the barrels, the only product I use on the wheels is truck wash and a pressure washer, followed by (inset your chosen name brand) wash and wax, time per wheel is probably 2 minutes total, cleaning the barrels is easy with one of these microfibre thingies on a stick from Sabco, they're also great for getting in between the front guards and body, and tight spots in the engine bay  
    • An updated post here. Sounds to me like there's definitely a bit of sketchiness here.  Old mate with 10 rusting Torana's in the front yard might be more who they're focussed on. (For right or wrong).
×
×
  • Create New...