Jump to content
SAU Community

Tps Signal Modifier For Autos?

zoomzoom
 Share

Recommended Posts

zoomzoom Mentor

zoomzoom

Posted
Posted

Hi Im trying to find a device mentioned by another member, one that would modify the throttle % signal for the transmission, so that you change the shifting response of the auto. eg, you can open the throttle plate more, but the transmission still thinks you are opening the throttle less, and so wont kickdown, rev out etc. I dont have any name to search for, but does this sound familiar?

Link to comment
https://www.sau.com.au/forums/topic/434360-tps-signal-modifier-for-autos/
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

If it changes the TPS position, the box may well think you aren't needing full line pressure to the auto, which means slipping clutches.

I would speak to MV, Kewish or some prefered specialist before you try anything like that.

You could always build the box and manualise it...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • GTSBoy
      Anyone know this frontpipe?

      By GTSBoy · Posted

      So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...