Jump to content
SAU Community

Recommended Posts

Oh the lols

only do the Getrag if you do the 3.545 diffs as well, 1st gear in my 34 is now and always was useless even when it was a 2.6 with -7s, so add 4.11s to that and you may as well stay with the 5 speed as you won't use first with the Getrag

I can't wait to see the difference between 4.11s and 3.545s with the two identical OS88s once put side by side :D

I plan on being there for that event! :D

actually the Getrag is heavier then the 5 speeder so the advantage is on my side there by a couple of kgs

I'm hoping the longer first will get me off the line better and with the shift cut setup my ET should improve but doubtful my MPH will increase much, car is just to heavy :(

Needs more powahs

Ok well I've decided on the box I want and it's a ppg helical dog as like you piggaz highway driving with a 5th straight cut would do my head in. But would I have the same problem as with the os box regarding the taller gears that the ppg comes with? Sorry my set up is a an unopened rb26 which I'm about to put hks gtss turbos in..

If you are only going to run GT-SSs and no more, source a Getrag and 3.545 diff gears, much nicer to drive and plenty strong enough for the power a 2.6 with GT-SSs can put out

I will stroke the engine eventually and put bigger turbo's so will the getrag still be they way to go will be looking at 400+ at the wheels. but for know I will be driving it with the gtss and definitely need to do something about the gearbox as I have a few gears crunching

You know you can rebuild the box with new syncros for 1100-1200 bucks inc labour

Yeh but if I pull it out I would like to make it stronger. . The car does get used a lot for motorsport especially hillclimbs some 1/4 runs and the occasional track day ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Done about 5k Km on the PS5's now, excellent street tyres, great in the dry, and the wet, seem to be wearing very well, I haven't measured tread depth, but it looks like minimal wear, I also had a different alignment done about 1500km ago,  From looking at the tread wear, which is really only minimal, the alignment changes were based off how the tread looked, and how it felt throwing it around, the changes have shown great results 215/45 17 at 32 psi Front Caster: 5.5° Camber: -1.5° Toe: 0.0mm Rear Camber: -1.0° Total Toe-in: 1.5mm I actually prefer PS5's now over the RS4's, as the PS5's are much better in the wet IMO, and as the MX5 gets driven in all weather conditions doing daily duties, hwy trips, and blasts in the mountains, wet weather grip is high on my priority list
    • To update this thread. I got sent a replacement Attesa pro unit and all is now working as expected. Cheers
    • FD is so sexy she can pull off tri-spokes
    • Indeed they do. Best my diff builder could tell is it's a combination of the different cut/angle and it would seem they lap them in well on accell but less so on decel. He had to use a slightly different pattern to the lap to get the best result noise wise. Also as the rear diff runs in, the whine is getting less.        Overall they seem like a good thing so far. He's done a few neat crown/pinion before but all for race cars with loud everything, in most cases the exhaust is louder, so I am the first to notice.... and be somewhat of a pain   
    • What do you mean by "test"? It sounds like you're just switching things on and off that you already know don't work. Get the wiring diagram and a multimeter and start looking for power where there is supposed to be power and earth where there is supposed to be earth. Look for continuity across switches that are otherwise unresponsive, etc etc.
×
×
  • Create New...