Jump to content
SAU Community

Tires Fitted, Where To Buy

GH05T

By GH05T,
in South Australia

 Share

Recommended Posts

GH05T Grand Master

GH05T

Posted
Posted (edited)

hi all

i need to buy some new tires for the stag daily

most probably 245/40/18

where do you guys recomend as far as buying and fitting?

i would prefer to buy them and have them fitted at one place but if their is for instance an internet based cheap as hell place then i will do that

i have been looking at a few options/prices so far

Falken 453 $279 each

continental (forget which) $249 eash

Bridgestone RE002 $267 each

Khumo KU31 $160 ish each

im open to brands and opinions if one is available for great prices,

do we have an SAU tire guy?

also if someone is selling good tires in this size pm me

im no northern subburbs SA

Edited by GH05T
Link to comment
https://www.sau.com.au/forums/topic/434838-tires-fitted-where-to-buy/
Share on other sites
ZED X Rising Star

ZED X

Posted
Posted

I just bought another set of KU31's for my 32R off ebay. SellerID: INT-TT

These were 235/45/17's at ~$100 per tire ~$10 each for delivery.

However 245/40/18 would probably be significantly more.

Mind you your also going to have to front a cost to have the tires fitted. This cost me around $40 from tyre power at parahills.

All up around ~$480 for the full set fitted and balanced, which isnt bad.

GH05T Grand Master

GH05T

Posted
  • Author
Posted

yeah not too bad,

my problem is im not sure what price increase is worth the dollars,

for instance im looking at things like achillies for cheap vs a bit more for khumo which i think is worth it, but should i spend even more and get the bridgestones?

am i getting a huge ammount more for my money or am i just getting the next tire in the line.

Krishy Grand Master

Krishy

Posted
Posted

If you are only going to be driving on the street than I would highly recommend RE001's from Bridgestones. Slightly expensive but worth it in my opinion. I have KU 36's on the rear and RE001 on the front and that seems to be a pretty good combination. 36's give reasonable drive and the fronts grip like anything I have had so far.

4bidn1 Mentor

4bidn1

Posted
Posted

Just get Achilles cost you about 450 for the set , correct weight and speed rating for stags , and to be honest there as good as my khumos that are twice the price , jet r31 runs them two

ZED X Rising Star

ZED X

Posted
Posted

The questions you need to ask yourself are, what are your expectations? What do you want out of the tyre? Is it driven in the wet? How often do you want to be replacing them?

The thing to consider is that tyres are a consumable. So if all you're doing is driving around on the street and its daily driven. Do you really want to be slapping on tyres that are 2x the price when you wont even see the full potential of the tyre? Sure you want the added safety and the ability to pull up as soon as possible. I couldn't justify spending $1000 on a set of tyres that would only last me a year.

I dont think i'dd ever go back to KU36's on a daily. My GTR was abit of a handfull in the wet on KU36's. Of course if it wasn't daily driven they would have been ideal.

I cant comment on RE002's but it was a consideration at the time. In hindsight i regret the purchase of my KU31's as i no longer drive my GTR to work so it sits in the shed until it gets a hammering :)

GH05T Grand Master

GH05T

Posted
  • Author
Posted

Hey Zx,

that's basically what im trying to work out.

i do 600km a week, half highway driving, half city, sometimes spirited hills drives/ cruises, highspeed large roundabouts :P

i have bridgestone....somethings maby re001 or the 050 i dunno, on my current 17s, amazing tires, i have had khumo ku31 on my R32, not bad for the cost.

getting mixed feedback on Achilles but i know they are bang for buck the best for cheap.

im not interested in ku36 for 600km per week i dont want a semi slick, the bridgestones seem to have good life and well good all round.

Achilles will be damn cheap and for $1100 the bridgestone will be the best for that price (seeing as i cant seem to find any under $1500 fitted)

it seems i just need to decide to i cheap out and go Achilles or spend the extra and get the bridgestones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...