Wtb: Rb30 Bottom End

[SkudR33]

Hey guys,

Need to buy a rb30 bottom end that's suitable for an rb30/25det conversion - don't mind if it needs reconditioning as I will be throwing a set of forgies in it.

Thanks in advance

[gold-3lt]

I have one in brisbane. It's been rebuilt in 2006 and had only done about 5000-10,000km max before the car it was in was rear ended. It is a series 2 block and has 20 thou over acl cast pistons, standard rods and acl bearings. i believe the block may also have been decked slightly. make an offer if you want it. I don't want too much for it as I have too many engines around at the moment. I also have a good running series 1 rb30 out of my one owner vl wagon that i recently bought off the original eldery owners. It will be out of the car within the next week or so.

[R32GOJIRA]

I have a bare RB30 block (not sure what series) with crank and cradle that came out of a VL wagon. Not sure of kms.

Will let it go for $300.

Located in Wollongong NSW.

[SkudR33]

First up sorry for the delay... Been flat out these last 2 weeks

I have a bare RB30 block (not sure what series) with crank and cradle that came out of a VL wagon. Not sure of kms.

Will let it go for $300.

Located in Wollongong NSW.

Bare RB30 block is good... Does it have the machine area at the front to fit a new tensioner and does it have the holes for the turbo lines on the right side of the block?

To be honest, $300 is very pricey. Can get the whole motor for $350-$400. What's the lowest you'd go???

I have one in brisbane. It's been rebuilt in 2006 and had only done about 5000-10,000km max before the car it was in was rear ended. It is a series 2 block and has 20 thou over acl cast pistons, standard rods and acl bearings. i believe the block may also have been decked slightly. make an offer if you want it. I don't want too much for it as I have too many engines around at the moment. I also have a good running series 1 rb30 out of my one owner vl wagon that i recently bought off the original eldery owners. It will be out of the car within the next week or so.

Hey bud, sounds pretty decent. Just need you to give me a starting point for a price - don't want to unintentionally throw a ridiculous price at you. Plus I gotta figure put how much it will cost to get it freighted to Sydbey!

[R32GOJIRA]

Ill have to check it for you mate. Havent had a look at it for a while. Its just been sitting in the garage for a fair bit. Ill check tomorrow and let you know.

Mate if you give me $200, you can take it.

[SkudR33]

Ill have to check it for you mate. Havent had a look at it for a while. Its just been sitting in the garage for a fair bit. Ill check tomorrow and let you know.

Mate if you give me $200, you can take it.

Thanks dude

[gold-3lt]

Send me your number and i will Send you some pics of it. After 200-300.

[R32GOJIRA]

Thanks dude

Hey Joey,

Got some pics to send to you of the front and side of the block.

Send me your number and ill mms them to you.

[SkudR33]

I pm'd my number

[R32GOJIRA]

Got it champ.