Jump to content
SAU Community

Recommended Posts

In the Daily Telegraph today, watch the video too.

http://www.dailytelegraph.com.au/news/nsw/reading-the-riot-act-to-dodgy-car-dealers-over-odometer-tricks/story-fni0cx12-1226759295622

NSW Fair Trading and the Motor Traders' Association have warned the odometers of more and more vehicles - imports in particular - were being tampered with because, as things stand, "unscrupulous" car yards can get away with it.

But under a plan being developed by Fair Trading with Roads and Maritime Services (RMS), cars bound for Australia would have to be accompanied by papers showing their odometer reading at the time of deregistration in that country. This is not a requirement at the moment.

294847-e48e866a-4c42-11e3-95c1-9e9b6c573

John Rolfe in front of a questionable Toyota Supra on Parramatta Rd, Concord. Source: News Limited

Fair Trading is also exploring whether the Motor Dealers Act should be amended so car yards have to provide potential buyers with such information. Then dealers wouldn't be able to plead ignorance - which is enough to get them off the hook under current laws.

"Odometer tampering is a problem and it's on the increase," Fair Trading investigations director David Byrne said. The main source of imported used cars is Japan - about 5000 cars a year.

A web-based service which claims to be able to ascertain odometer readings on cars from Japan said 90 out of 100 odometers checked at the request of Australians were found to have been wound back.

In NSW there were 13 breaches in 2010-11 involving odometer tampering, 20 in 2011-12, 15 in 2012-13 and seven in less than four-and-a-half months this financial year, Fair Trading data shows.

Action is already on the way, with the penalty for tampering about to be doubled to $22,000.

Public Defender began investigating tampering after a tip from a victim, who pointed out a 2002 Toyota Supra. Auction papers he supplied - which I could not verify - said the car had done 91,170km when sold in Japan. This week I found the car on Sydney's Auto Alley. The odometer read 48,260km.

When it was put to the dealer, who cannot be named for legal reasons, that the odometer had been wound back, he said it wouldn't surprise him: "If that's happened it's happened on Japanese soil … I'm not the one who tampered with the odometer."

The dealer said the yard tried to limit its exposure to cars with tampered odometers but it was "rife" in Japan. There was no way of telling if a car had been driven further than its dashboard indicated.

Later the dealer rang to claim the auction papers I showed him may have been altered but he could not provide proof. Regardless, the Supra would be "removed from sale", he said.

A good step forward?

Edited by colourclassic
When it was put to the dealer, who cannot be named for legal reasons, that the odometer had been wound back, he said it wouldn't surprise him: "If that's happened it's happened on Japanese soil … I'm not the one who tampered with the odometer."

Right-o ;)

Well, when their stoopid enough to post Japanese agent shot videos with the original mileage visible, the car in their possession and the car arrives with 90k kms less, then it shouldn't be too hard.

However is that good enough for the law? I dunno.

You're able to request for the de-registration papers when the vehicle was in Japan.. it shows you the exact details, the KMs, etc...

I like how dealers always blame the Japanese winding down KMs, etc.. they're a very honest society, they wouldn't do any of that shit. Even when the tsunami took out a town, ATMs were destroy and money was floating about.. no one looted, no one picked up a single note floating about. So what says they want to even wind their KMs back?

It's all done here before compliance.

You're able to request for the de-registration papers when the vehicle was in Japan.. it shows you the exact details, the KMs, etc...

I like how dealers always blame the Japanese winding down KMs, etc.. they're a very honest society, they wouldn't do any of that shit. Even when the tsunami took out a town, ATMs were destroy and money was floating about.. no one looted, no one picked up a single note floating about. So what says they want to even wind their KMs back?

It's all done here before compliance.

Interesting idea, and I agree with you about Japanese culture. However I believe there are a lot of people of a certain ethnic group that is not Japanese that are a big part of the car business. I've seen details of it in the past, however can't remember where I saw it.

so those dealers blaming the Japanese docks can go get fuarked...

The cars in Japan are all auctioned with usually 100 000+ kms on them some how they end up here with like 1/3 of the kms. I've seen it with my own eyes, same car in an auction site, de-registration papers, then blame at XYZ dealer in Parramatta Road with 1/3 the kms.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...