Jump to content
SAU Community

17yr Old Male / First Car Choices...  

23 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

A fella I work with has a 17yr old son who just got his license. P plates etc...

The son (who loves my car and also has a mate with a 200sx), asked me which I thought would be a better choice as a first car for himself.

a) R32 GTR

b) 200sx

c) Evo 8

I figured I'd put it to you guys and see what y'all reckon.

I personally thought if these are his only choices then probably the 200sx due to potentially being cheaper for repairs (No Allwheel drive issues etc...)

But I still think he should just get a reliable old N/A shitbox to learn in now he has been granted a license.

As my Dad has always said... "First you get your L's, then your license, then you learn to drive." ;)

Thoughts?

$2000 - $5000 shitter that runs and is registered

Perhaps an R33 GTS-T if looking for Turbo jobby for $6k

A $4k magna is ideal for a 17yo to start with - Cheap, reliable, 3.5 and better & quicker than your Commie or Ford.

Edit: Oh and for $4k you will get a great one owner with service records (these cars are underated).

2nd Edit. I chose other. The cars you mentioned are high maintenance and hard to find a good one.

  • R32 GTR - $20k+
  • Evo8 - $25k+
  • 200sx - $?
Edited by Sinista32

I would recommend something a bit cheaper like a R31 or R32 gtst and have some fun tinkering around.

But if he wants to spend the money then an ADM S15 would be great for a reliable, Fun and also easy to insure car, also since its ADM it won't need to go through Dickson,

Since i was 16-19 have owned a MX73 cressida 2x KE corollas 2x Datsun 1200s, SS commodore , 2x r32 gtst , Lancer , Mirage, S15 ,S13 and currently my R32 GTR.

I must say the most fun i have had was in the cheapest and simplest cars (datsun 1200, R32 Gtst, and the KE corolla)

Wowsers, if he can afford a GTR or Evo straight off the bat then good on him! I'd be checking the insurance costs first though!

I'd probably say the 200sx because it would be cheaper to buy and *possibly* cheaper to insure being Aus delivered. (I was thinking S14 when I said cheaper to buy - just realised you probably mean S15).

Not sure if he means S14 or S15 200sx.

Apparently he is going Halvies with his Dad to cover the cost. (not sure on Dad's opinion)

Insurance would be a killer for a Turbo + 17yrs old but he wants what he wants...

My first car was a 1985 Bluebird and it was Awesome. Drove that old girl for 11yrs.

R31 or an older Datto etc with dents and scratches is all a youngen needs I think, or even, dare I say it... a Pulsar. LOL! (Excel, Mirage, etc...)

evo 8.

alot easier to drive.

newer then the 32, so generally more reliable.

can find easier in nicer condition.

less popo attention.

move onto gtr later, when he gets bored with the emo.

  • Like 1

evo 8.

alot easier to drive.

newer then the 32, so generally more reliable.

can find easier in nicer condition.

less popo attention.

move onto gtr later, when he gets bored with the emo.

lol...and if he is inexperienced he is almost certain to destroy it because it practically drives itself to insane speeds...

at least the tail happiness of a 200sx could scare him a little and therefor might teach him how to drive properly....

I'm sorry but the thought of an inexperienced 17 yr old in any of the cars listed chills me to the bone.....

I mean most kids cant handle a stock falcodore, let alone an actual performance car..

heres one they prepared earlier..\

1452420_741627485850877_1779459885_n_zps

If kid is a granny driver or has prior experience/driver training MAYBE then I would consider letting him have a wrx at best...

First car + turbo. I would like to advise against it. But everyone is as good as a race car driver apparently.

I would get him to get a AWD if he gets a turbo. A lot more grip. Given his mate has a 200sx you can be sure they'll be fooling around.

WRX

SV6/XR6

Skyline GTST at best.

Its all been said! too much for a new driver. A performance turbo is not something you learn to drive in.

My first car was a 78 Mazda Capella. rwd 1800, still had some fun, and didn't kill myself in the process.

Sounds like he may have more money than sense, so maybe the world would be better off.. jks. =P

id go a r33 gtst... being on my ls and having one, I love it!

and it dosnt matter how much power you have its about how you drive it...

but mind you my r33 is tail happy in the wet :( would love something with a little more grip!

I think he needs to consider insurance, reliability and cost of fuel

If he is into cars maybe a cruiser. Something low slow with big rims. Still fun and can he tinker with it, atleast till he learns to drive.

Not a bad little car. I drove one of them for about 20kms back in 1995 when I was a Detailer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...