Jump to content
SAU Community

R33 Gtr, Gtst Parts, Fuel Pump, Interior Etc


Recommended Posts

For Sale:

Bosch 044 fuel pump fitted to R33 cradle ready for direct fitment, near new $100

post-44496-0-30802400-1385193644_thumb.jpg

post-44496-0-68223300-1385193692_thumb.jpg

R33 Rear vision mirror VGC, also same as R32, R34 $20
post-44496-0-78961000-1385193513_thumb.jpg

R33 GTR Clutch master cylinder perfect working condition $40

post-44496-0-07699600-1385194029_thumb.jpg

R33 GTR midnight purple bootlid, (no lip) $40

post-44496-0-64005000-1385193757_thumb.jpg

R33 GTR blow off valves x2 with complete recirculation piping perfect working condition $120

post-44496-0-62330400-1385193805_thumb.jpg

R33 GTR, Will also fit GTST interior lights $40 pair or $20ea

post-44496-0-30736300-1385193903_thumb.jpg

R33 GTR/GTST window plastic trims $20ea

post-44496-0-01018700-1385193965_thumb.jpg

R33 GTR interior fuse box cover $20

post-44496-0-34267000-1385193998_thumb.jpg

R33 GTR front seatbelts VGC $60 pair

post-44496-0-31596000-1385194058_thumb.jpg

R33 GTR C pillars VGC $20 pair

post-44496-0-44930000-1385194123_thumb.jpg

R33 GTR ABS VGC $100

post-44496-0-40590800-1385194237_thumb.jpg

R33 GTR handbrake boot good condition $10

post-44496-0-55217200-1385194191_thumb.jpg

R33 GTR demister dash vents VGC $10 also have complete dash with airbag cover VGC $50

post-44496-0-50642700-1385194146_thumb.jpg

R33 GTR factory turbo alloy elbows $30 pair

post-44496-0-47417600-1385194084_thumb.jpg

Genuine nissan fog lights from R32 m spec model, can make to fit any car $40

post-44496-0-97139300-1385193929_thumb.jpg

Located Gold Coast, will freight at buyers expense
0414596256 John

Edited by slidinr32gtr
Link to comment
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...