Jump to content
SAU Community

Recommended Posts

Seven-time Formula 1 world champion Michael Schumacher is in hospital after suffering a head injury in a skiing accident.

The 44-year-old fell while skiing on unmarked slopes in the French Alps and hit his head on a rock.

He was attended to within minutes of the accident before being airlifted to Moutiers hospital.

Despite initial reports suggesting his injuries were serious it is believed that Schumacher, who was wearing a helmet, is not in a serious condition.

According to the Press Association, Gernignon Christophe Lecomte - director of the Meribel resort in which Schumacher was staying – told Radio Monte Carlo Sport that the ex-Ferrari and Mercedes racer was conscious, and was airlifted with 15 minutes of the accident.

The German's manager Sabine Kehm confirmed nobody else was involved in the fall, and was also quoted as saying: "Michael fell on his head when he was on a private skiing trip in the French Alps. He was taken to hospital and is receiving professional medical attention.

"We ask for understanding that we cannot give out continuous information about his health."

http://www.autosport.com/news/report.php/id/111978

'Tis likely that "Schu" will remain in a "permanent vegetative state" unless...

Dat penises nose though

The Chin could live with the step but buggered if he was driving a penis nose.

I've only ever seen a sketch of one bloke's interpretation (ie 'guess') of what the 2014 cars would look like that suggest they'll have a 'penis nose'. All the other guesses have been very different. I'd be willing to bet scarb's is miles off when the cars get unveilled.

Force India looks good. Can't see the nose yet though...

'Tis likely that "Schu" will remain in a "permanent vegetative state" unless...

Last I heard before the family closed off communications with the outside world was he was still in a coma. Vegetative state is a different clinical state. "Permanent vegetative state" is certainly not what anyone has called it, because they don't use that term until the patient has been that way for about 1yr...

The truth of the situation isn't terribly optimistic, but spreading completely incorrect information is not helpful. This is about the best quality information (well speculation) we have since the family shut off communication to his many anxious fans:

http://formerf1doc.wordpress.com/2014/01/22/what-may-be-going-on-now-and-where-this-might-be-going-long-speculative-and-detailed/

for those that haven't seen check this out for a bit of detail about the engines for this year.

http://jalopnik.com/how-formula-ones-amazing-new-hybrid-turbo-engine-works-1506450399?utm_campaign=socialflow_jalopnik_facebook&utm_source=jalopnik_facebook&utm_medium=socialflow

is it just me or do these newest lot of regs spoil what could have been some incredible engineering?

They should just make it a regulation that the very tip of the nose cone had to be wider and it wouldn't look so bad? Eg tip of nose width must be 'X' mm wide or '85-90'% of the width 300mm from tip

Edited by Scottydoo

Formula 1 is to make another attempt to ban tyre warmers in 2015.

Previous efforts to introduce a ban have been scuppered because of safety concerns, amid worries from drivers about racing on cold tyres.

But as part of a raft of changes proposed for 2015, the FIA announced on Thursday that all forms of tyre heating devices will be outlawed.

The FIA has also ratified that the minimum weight of cars will increase by 10kg to 701kg in 2015 - which should help alleviate concerns that heavier drivers are put at a disadvantage.

http://www.autosport.com/news/report.php/id/112250

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...