Jump to content
SAU Community

Recommended Posts

they sound like cars from a lower category :/

That's what I was getting at, but we'll have to wait and see til they're at full noise I guess...

Eric Boullier appointed Racing Director. Read the official McLaren Mercedes press release here: http://tinyurl.com/nwwhfba

they're probably not going to ever hit the redline except in qualy. An article I read ages ago suggested that the fuel flow limit and power delivery characteristics of forced induction mean 12,000rpm is more likely to be the operational ceiling rather than the mandated 15,000rpm limit. They also have significantly less engines to use this year, so lower revs seems likely.

But having heard a few more videos, I'm starting to think they sound alright anyway. Sure, they're no V10, but those days are long gone...

I'm liking the looks of the cars too. Eg Force India looked crap in photos with that big black dong out the front, but it looks pretty good on the track. At least there's variety and innovation being shown which is interesting, and to me they all look better than the stepped noses from last year. Well, maybe not the Zoidberg Lotus...

It's very unlikely I know, but there's potential for a smaller budget team to have jagged a design edge thanks to these regs.

Also hoping the William livery isn't just for testing - it looks good in blue.

I'd wait till the next test or race day before writing the new engines off. I'm sure they are not going flat out yet. There must be plenty of engine and car tuning going on there. I know the engines have probably done thousands of hours on engine dynos, but thats different to taking it out on a track.

After all they went from 1:27's on the first day to 1:24's on the second day (unless my memory has failed me :) )

Just shows you how much they were holding back day 1

Last year they were sub 1:20's, with all the aero differences I dont expect them to get near last years times, but there is probably still a bit left in them

Or maybe I'm just saying this stuff so I will convince myself I like the new sound lol

If you can hear some turbo whistle maybe it will make up for it

To be honest, sounds like the honda nsx with an exhaust at high revs (obviously without the turbo :-) )

Whilst both sight and sound play a massive part in formula 1, for me its more the fact that this is the elite level of driving and pushing limitations on engineering and producing the quickest cars going around a circuit.

So just personally speaking, sound of the engines were nice but nothing worth getting too upset about as long as they still go fast. I am sure there is a WHOLE (yes i used caps!) lot of seconds to be stripped off these laptimes as we progress throughout the season. I think "Ve Tool" even said that in a recent press release.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
×
×
  • Create New...