Jump to content
SAU Community

Recommended Posts

I've sold the motor and gearbox out of my R33 GTST and now that I've got some more time I'll be wrecking the rest of the car. It's a black series 1.5 with 156,000kms on it. Most parts are still in excellent condition unless stated.

All parts are located in Macleod (Vic). Smaller parts I will post at additional expense.

Below is a list of what's available but feel free to enquire about any things I may have missed.

Prices attached but some parts will be open to reasonable offers.

Part Description Asking $

Pod filter with adaptor Needs new foam 50

Turbo custom intake pipe 100

Intake manifold 50

Engine wiring loom 150

Turbo with internal gate GT-2876R low mount 700

Radiator 60

Engine mounts 75

Fuse box lid 20

Radiator overflow bottle 20

Washer bottle and mototrs 25

Aircon condenser 125

Aircon compressor pump 90

Power steering pump 100

Alternator 90

Clutch hard line 20

Master cylinder 60

Manual pedal set 50

Driveshafts 75

Rear diff Some minor play in it 100

Exhaust

Exhaust pipe Blitz 3in 300

Decat pipe Straight 3in bolt on 45

Wheels

Impul NS-01 light weight racing 17in inc tyres, 70% frt, 40% rr 1200

5 stud hubs Front 140

Rear 140

Spare space saver wheel 50

Suspension

Fronts Stock 75

MSD adjustable 100

Rears Stock 75

MSD adjustable 100

Front castor rods 75

Front lower control arms 100

Front upper control arms 50

Brakes

Callipers Front 100

Rear 100

Discs Front 50

Rear 50

Handbrake drum assembly 150

Master brake cylinder 50

Exterior

Body Shell 300

Front reinforcement bar 120

Rear reinforcement bar 100

Front bar Type M 120

Rear bar Stock 100

Side skirts Stock or type M? 100

Rear pods Veilside 70

Spoiler - Series 1 No stop light and scratched 50

Door LH 150

RH 150

Side mirrors LH 50

RH 50

Bonnet Black - resprayed 200

Boot Black - resprayed 100

Front fender LH 75

RH 75

Front wheel liner Front RH 20

Series 1 headlights Front LH 120

Front RH 120

Series 1 tail lights Rear LH 80

Rear RH 80

Indicators Side - clear pair 60

Interior

Seats Front LH Recaro 200

Front RH Recaro 300

Rear seats 50

Floor mats Stock skyline 75

Floor carpet 50

Instrument panel Standard black good condition 100

Centre console 20

Shifter cover 25

Heater core New 3 years ago 50

Heater controls 50

Headliner 50

Boot trim 50

Gear knob Razor aluminium 10

Gear boot & surround Brand new 30

Handbrake boot Brand new 10

Gages Taco - 4in with shift light 60

A pillar twin mount 40

Boost - HKS with solenoid 60

Steering wheel Just wheel - needs recovering 50

Airbag 100

LH door Trim minus switches 50

Window switch 50

Window motor 100

RH door Trim minus switches 50

Window switch 50

Window motor 100

Pillar trims LH 30

RH 20

post-7819-0-17653500-1385374664_thumb.jpg

post-7819-0-33303500-1385376408_thumb.jpg

post-7819-0-46782900-1385376534_thumb.jpg

post-7819-0-82878500-1385376576_thumb.jpg

post-7819-0-92961600-1385376619_thumb.jpg

post-7819-0-41004400-1385376651_thumb.jpg

post-7819-0-09545500-1385376694_thumb.jpg

post-7819-0-06195800-1385376744_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/435513-vic-wrecking-r33-gtst-s15-black/
Share on other sites

Ill buy the recaro driver side and the floor mats can you send to sydney?

Ash

The floor mats can be sent through Aus post but I don't think the seat will be able to. If you can find a shipping company that's willing to do parts that size then I'm happy to send it.

FOR ALL: I'll try and get pictures out this afternoon of the requests so far!.

Hey will post Aircon compressor pump? I'm keen to buy it.

Not a problem posting the Aircon compressor pump.

Postage should be around $25 to send it with the weight of it. But firstly, where's it sending to because remote areas sometimes attract higher rates?

Can you pm me pics of the gear knob, gear boot + surrounds and handbrake boot?

Both boots are brand new before breaking up the car (initial plan was to do it up and sell the car whole).

post-7819-0-19354400-1385466883_thumb.jpg

Photo and best price for the turbo intake pipe?

Pic attached and the best price is $80 for it.

The intake pipe is aluminium and still has an attachment for the plum back BOV pipe.

post-7819-0-24302600-1385467080_thumb.jpg

PARTS UPDATE:

Floor mats - SOLD

Doors - SOLD

Front bar - SOLD

Headlights - SOLD

Parcel shelf - SOLD

Frt RH qtr panel - SOLD

Keep the questions coming

Aircon compressor - SOLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...