Jump to content
SAU Community

Recommended Posts

Hey guys just letting everyone know if your thinking of getting your car painted stay away from A & B redesign and finishing. There on Rochdale rd for anyone in brisbane. The owner is a guy named Ben Curtis. I made the unfortunate mistake of getting this guy to paint my gtr and wow what a crap job the door had a mark in it from where an apperent bug flew into the clear and I asked to fix it and they say yea but at my expense. Also the car wasn't denibbed either. The rear wing had put marks in it as well wasn't primed or rubbed back. He gave me a written quote for the job and then after it was painted charged me an additional $600 on top for apperent more paint. Would not release the car to me until this extra cost was paid. These guys are real scabs and please for your own sake do not use these backyard dodgy guys

Link to comment
https://www.sau.com.au/forums/topic/435640-dodgy-car-painter-in-brisbane/
Share on other sites

Total cost just for the respray he quoted $2500 then after he painted it $3100. Now for this the car it self was finished he had nothing to do at all to it. He only had to prime the wing and block it one more time then it was finished. So basically car rolled up and paint it also he said they painted it in a downdraft booth which I find hard to believe cause of the amount of trash in the paint. Even had eye lashes in the clear.

I gave him a spare Rb25 manifold when he was working for a detailing company and he offered to paint my car for around the same price (said he formerly worked at a bodyshop and could hire their booth).

may as well of because I payed twice what you did at cameron's bodyworks and sounds to be about the same quality as yours, leaking windows, runs, dust marks, clear coat peeling, scratches, took it back three times and got more damage every time so cut my losses, was 1200 over quote to, now it's sitting under a friends house because I can't stand looking at it lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Por qué no los dos? Body colour red with black stripes down centre, onto bonnet and bootlid.
    • From my bolts, standard M8 with 1.25mm thread pitch (M8x1.25mm).    Length is 19mm under the head and has a captive 18mm OD flat washer.   20mm length from a bolt shop is what you'll be able to get.   Make sure they're zinc plated.    If you're concerned about strength, grade 8.8 will be more than enough. Original PN is 01121-04971.  Now discontinued according to Amayama but that's because it's one of the parts that's been captured by the Heritage program, which explains the ridiculous price.   New PN is 01121-RHR20: https://nismodirect.com/nismo-heritage-bolt-pin-hinge-hood-bnr32-nissan-skyline-gt-r-01121-rhr20-01121-04971/ About AUD33 converted from Yen in the above link but that's just one example. Interesting that the hinge-to-body bolts are still available non-heritage.....PN 08116-8161G around $2 each (amayama).    Same thread but 16mm long.
    • Well, if that filter was impeding fluid flow, then it could have similar effects to faulty solenoids. The TCU will register a fault when it does something (ie, changes the state of a solenoid) and does not detect the required result. If there are other causes that can make the same lack of result, then they will be indistinguishable to the expected cause for which the TCU has a code.
    • Yellowjackets, red ones, blue ones (other than Splitfire) have all been demonstrated to be unreliable on turbo engines. That unreliability can be anything from outright failure (ie, 4 out of a set of 6 working out of the box) to just not being strong enough for the task, on a boosted engine. Not enough of us care about NA engines to know whether that unreliability is an issue for the undemanding needs of an NA RB20. I should think though that the DIS-008 should fit the 20. There's not really any reason for the head/coil mounting area to be any different on those 2 Neos. I wouldn't be buying Splitfires, or any other old tech coilpack, for a car in this day and age though. I would buy modern pencil coils and do what needs to be done to adapt them to the loom. That's relatively trivial these days, with numerous kits for fitting R35, or Audi, or Yaris/Corolla coils.
    • Keen to see how much work is needed to get an abandoned Skyline going. My R32 has been sitting idle for three years or so but finally got some time to get it going again. (Also lurking SAU and trying to hit 10 posts so I can start my own intro thread with pics)
×
×
  • Create New...