Jump to content
SAU Community

Nismo Diff Centre

tones
 Share

Recommended Posts

tones Enthusiast

tones

Posted
Posted

hey guys, I have a hcr 32 (rb20det manual) and am looking at buying a 2nd hand 2 way nismo diff. I found one but its in a r33 housing, will this fit the r32? or will the centre fit into the R32 housing. The guy assures me it will, but I would just like to be sure. The housing it its in doesn't have cooling fins like the one in my car, it has an outlet for an oil cooler I think. it does have 5 bolt shafts like the hcr32. is there any other way I can be sure? any info will be much appreciated thanks guys

Link to comment
https://www.sau.com.au/forums/topic/435706-nismo-diff-centre/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

R33 housing will fit into R32 subframe. There are differences though. You have to use the R32 rear cover (different rear mounts), and the R32 diffs do not use a bush in the front mounts (ie they're solid), the R33s use a bush. And if there is ABS involved, then the diffs migh be different lengths.

The centre will fit into the R32 housing. You need to throw both diffs at someone who knows how to set them up properly, and you will probably be wise to get them to check bearings and throw some nre seals into it as they put it back together too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • GTSBoy
      RB25DET Engine Oil Dipstick Length

      By GTSBoy · Posted

      3 or 4 8-balls in the sump?
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • PLYNX
      Is this saveable r32 gtr seat

      By PLYNX · Posted

      Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...