Jump to content
SAU Community

Choosing An Injector

asps91

By asps91,
in Engines & Forced Induction

 Share

Recommended Posts

asps91 Rising Star

asps91

Posted
Posted

Hey guys, quick run down. Building my r33 gtr with 2860-5's with all of the usual supporting mods. I am now currently searching for injectors and have been offered quite a few different kinds by helpful members. They are:

-Power enterprise 800cc

-seimans 750cc

-sard 700cc

I'm guessing they roughly all flow the same, but may have different spray patterns ect. And was wondering which ones would better suit my goals.

All injectors have decently low k's on them and similarly priced.

Which ones would you choose and why?

Link to comment
https://www.sau.com.au/forums/topic/435715-choosing-an-injector/
Share on other sites
89CAL Grand Master

89CAL

Posted
Posted

Why would different cc injectors flow the same?

Power goal plays a big part in it. Need to know what fuel you want to run as well because if you plan on using e85 you will need larger injectors then if just running pump fuel

89CAL Grand Master

89CAL

Posted
Posted

Why would different cc injectors flow the same?

Power goal plays a big part in it. Need to know what fuel you want to run as well because if you plan on using e85 you will need larger injectors then if just running pump fuel

89CAL Grand Master

89CAL

Posted
Posted

Why would different cc injectors flow the same?

Power goal plays a big part in it. Need to know what fuel you want to run as well because if you plan on using e85 you will need larger injectors then if just running pump fuel

89CAL Grand Master

89CAL

Posted
Posted

Why would different cc injectors flow the same?

Power goal plays a big part in it. Need to know what fuel you want to run as well because if you plan on using e85 you will need larger injectors then if just running pump fuel

Piggaz Grand Master

Piggaz

Posted
Posted

Only planning to use 98, not touching e85. And not going to use id1000, no point? I'm asking what injector that I mentioned in my initial post would you choose and why as I can get them for an extreemly good price.

There was a reason why I suggested what I suggested. The ID's will drive a lot nicer than the "older" Sard/Denso injectors.

ID's are cheap enough now, it shouldn't even be a factor.

Mick_o Grand Master

Mick_o

Posted
Posted (edited)

Theres lots of points as to why you should choose the ID1000's & lots of points as to why you wouldnt bother using 2nd hand injectors. ID's are the best injectors on the market and are probably a few hunge more than the 2nd hand shitters ya planning on using. IF you are worried about spray patterns etc for good combustion theres only 1 choice! ;)

Thats the ID's!

As piggaz said the ID's drive alot better than anything else. Im running ID2000's in my evo and it runs like a dream idlea sweet and I get surprisingly good mileage outta a tank of E85

Edited by Mick_o
Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

Theres lots of points as to why you should choose the ID1000's & lots of points as to why you wouldnt bother using 2nd hand injectors. ID's are the best injectors on the market and are probably a few hunge more than the 2nd hand shitters ya planning on using. IF you are worried about spray patterns etc for good combustion theres only 1 choice! ;)

Thats the ID's!

As piggaz said the ID's drive alot better than anything else. Im running ID2000's in my evo and it runs like a dream idlea sweet and I get surprisingly good mileage outta a tank of E85

*like*

discopotato03 Grand Master

discopotato03

Posted
Posted

I think Xspurt do a 740 based on the kompact (short) EV14K . ID do an 850 GM based on the short EV14s as well . Actually the ID1300s are shorty's as well from memory .

Short EV14s do fit under the plenum on a 33 spec RB25 but you need a rail to suit 14mm injectors . People say modified RB25 Neo rails can work with a bit of stuffing around .

A .

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I think they were reselling the proflow RB25 rail, they were a little more expensive at around $200 I think, but great quality.

You can get 14mm rails for under $100 if you search around (egay, goodies direct etc) not sure on their quality though as I have never fitted one. You will need to work out injector spacing and brackets so they hold down tight.

The Xspurt 1000's drop straight into the RB26 with the kits I sell. No spacing required from stock, and the plug adapters are supplied.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • NZ-GTT
      R34 GTT Battery Relocation To Trunk

      By NZ-GTT · Posted

      I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      Damn... Not the feedback I want to hear.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Twas your car many moons ago that gave me the idea!
×
×
  • Create New...