Jump to content
SAU Community

Hey Guys!

Emre1994

By Emre1994,
in Introduce yourself

 Share

Recommended Posts

Emre1994 Newbie

Emre1994

Posted
Posted

Hey Guys I'm Emre, I don't have a Skyline at the moment but I will be buying one really soon in about 4 months or so when I get off my green p's. Found this website/forum and thought I might as well join, I'll be asking question/making threads so my knowledge about Skylines becomes better. See you guys around the forums and hopefully when I have my Skyline I'll see you at events too!

Link to comment
https://www.sau.com.au/forums/topic/435807-hey-guys/
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

Welcome Emre and Good luck, Post a Pic when you find "the one"

be careful when buying. a lot of shit being sold.

a lot of early posts are - "I bought my first skyline and it has these problems, plse help". It's to late by then ....

Link to comment
https://www.sau.com.au/forums/topic/435807-hey-guys/#findComment-7129057
Share on other sites
*LOACH* Veteran

*LOACH*

Posted
Posted

Welcome to the forum and nice work on doing some research before you buy a Skyline, there is a ton of info on here and knowing it should really increase your chances of choosing a good one when the time comes. Good luck!

Link to comment
https://www.sau.com.au/forums/topic/435807-hey-guys/#findComment-7129471
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 GTT idle problem

      By joshuaho96 · Posted

      Adjusting the idle screw is usually (emphasis on usually) just covering up deeper issues. Stuff like the cold start valve not closing properly. Throttle shaft seals on the way out. Coolant temp sensors getting out of spec. Coolant temp sensors especially can be a bear to diagnose because they can fail subtly. My dad just spent weeks chasing down his high idle. He cleaned the coolant temp sensor and everything but the resistance curve just drifts over time and if it's been 20+ years they also get super slow to respond as well. Has a massive effect on fuel economy as if it's off the ECU is going to run richer and command high idle for far longer than it should otherwise.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      How old is the battery, it's more likely your battery is on its way out.
    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      I reckon you'd get 90% off. My washer doesn't get between spokes very well. Haha! I love my Gerni!  Argh! Steam cleaning has its place for sure.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
×
×
  • Create New...