Jump to content
SAU Community

Recommended Posts

11 cars confirmed so far! Im sure we can do better than that lol We had 19 at the last one to Newport.

I reckon Maccas on the way to Wollongong. Well see what the majority would like and depends on how many joining in. I reckon there will be a lot of last minute cruisers.

Think we need to change the meet up point for the local guys as we won't all fit

I actually thought about this, that little bit of road in the left hand lane probably won't be enough for more than 10 cars. What about a second meeting point at sylvania maccas? It's just down the road...

I was talking about the second meeting point Daniel. For all the hobbits haha. It's only a tiny bit of road, if there's anymore than 10 cars I'm not sure where they'd be able to wait for us?

I think further up the highway in Sylvania you can technically park in the left lane but nobody ever does, you could easily fit 20 cars there.

Or just the entrance to the park? near loftus oval.




  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...