Jump to content
SAU Community

Recommended Posts

Hey all,

I know this topic has been discussed before, but a search didn't bring up any recent topics and didn't really answer my questions.

So, after getting my car stolen from my house last week and being fortunate enough to have recovered it, I'm not going to make the same mistake of being complacent again. I want to make a multi-layered security system for it, ie. hidden kill switches, keypad immobiliser, GPS tracking, the works. The car already has an alarm and aftermarket immobiliser, but that doesn't help too much when they get hold of my keys.

Now then, what is a good solution for a keypad immobiliser? Will be looking to install myself. At the moment I'm leaning towards Sanji - wireless, and comes from the crime capital of the world. Troy, if you read this thread, I'd value your input here.

My other thought was to create one myself. Originally thought it wouldn't be too hard; keypad switch wired to relay, relay to ignition. But this probably wouldn't be as simple to do as I thought, as it would need to rearm itself when the ignition is switched off, plus not sure how it would work with programming a code. So unless someone here has the know-how on how to do that, I'll go with an off-the-shelf item for effectiveness.

Any help would be much appreciated,

Cheers,

Martin.

Link to comment
https://www.sau.com.au/forums/topic/436080-keypad-immobilisers/
Share on other sites

Thanks Gavin, replied.

Can anyone tell me what the 'fail-to-drive circuitry' function does? I imagine it is automatic rearming of the device if the car isn't started for a period of time? And is there any way to obtain the installation instructions, Sanji only give them out to dealers by the looks of it...

I'm a bit of a security fanatic myself. My take on things:

1. Car should be equipped with a properly installed alarm and immobilizer system. As we know, installation is so important. I won't reveal my tricks, but the immobilizer module should cut fuel pump and either starter or ignition. Test yourself: if you can find/access the cut points or immobilizer unit within ~15 minutes of dissassembly, it's not hidden well enough.

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

3. Well Hidden Kill switch. I like the idea of a keypad immobilizer, but a kill switch will do essentially the same job, and with less hassle/cost. A magnetic reed switch could be used creatively used too. Cut a different point to what you did with the alarm system. Whenever your car is parked at home or for a longer time, flick the switch. If they break in and get your keys, they still won't be going anywhere. If they're stealing your keys, they're driving it away otherwise. Hide it in the boot if you're paranoid!

4. Don't care what anyone else says, old-school devices like steering locks or even wheel locks are a useful deterrent, once all of the above are done.

5. Park out of sight at home. Trust your instinct, if a particular street looks seedy, cough up the $10 and park in a lit garage, and do what I wrote above.

  • Like 1

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

Had never actually thought of that, it's so simple it's brilliant! I'll be doing that from now on

I'm a bit of a security fanatic myself. My take on things:

1. Car should be equipped with a properly installed alarm and immobilizer system. As we know, installation is so important. I won't reveal my tricks, but the immobilizer module should cut fuel pump and either starter or ignition. Test yourself: if you can find/access the cut points or immobilizer unit within ~15 minutes of dissassembly, it's not hidden well enough.

2. Once that is covered, if you're parking on the street or in public, always leave your car in gear and with the steering wheel turned 360 degrees from center. If they want to get it on a tow truck, they will need to get inside the car to straighten the wheels or put it into neutral. This will set of your now well hidden alarm, alerting either you, or others. Thieves obviously like to work transparently, so a loud alarm going off while the car is being towed onto the back of the truck will be less than ideal.

3. Well Hidden Kill switch. I like the idea of a keypad immobilizer, but a kill switch will do essentially the same job, and with less hassle/cost. A magnetic reed switch could be used creatively used too. Cut a different point to what you did with the alarm system. Whenever your car is parked at home or for a longer time, flick the switch. If they break in and get your keys, they still won't be going anywhere. If they're stealing your keys, they're driving it away otherwise. Hide it in the boot if you're paranoid!

4. Don't care what anyone else says, old-school devices like steering locks or even wheel locks are a useful deterrent, once all of the above are done.

5. Park out of sight at home. Trust your instinct, if a particular street looks seedy, cough up the $10 and park in a lit garage, and do what I wrote above.

Thanks for that mate, agree with all the above points. The car does already have a 5-point immobilizer and alarm system, and I always leave it in gear when parked outside. Steering wheel at full lock is something I generally do, though will always do from now on. My car is always parked in my garage and is never visible outside except for when I am driving in or out. So really my plan now is to make it as hard to steal as possible, even if they do get my keys.

I will definitely be setting up several kill-switches, and my idea with the keypad was more to add another layer to those kill-switches. I just thought about what I would do if I was a thief. If I was trying to steal a car and it wouldn't start, the first thing I would do is check for kill-switches. If there was a keypad there, I think I would be misled into thinking that was the issue. I would probably give up then and there, but say I took the time to pull everything apart and bypass the keypad, the car then still wouldn't start. At which point I could either waste MORE time looking for kill-switches, or move on. Then after all that if they do still manage to steal the car somehow, I will have the GPS tracker as a last resort.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...