Jump to content
SAU Community

Recommended Posts

Haha fair enough. How come you're wanting to change to an Evo?

My GTT with stock cooling was reaching oil temps of 110+ after ~3 hot laps and water temps were 110 minimum rising to 130 with a few hot laps. I fitted a 52mm Fenix radiator and some China oil cooler with a Greddy block and now I don't think I have seen either go over 80 degrees and I give it hell so both definitely make a huge difference.

Tossing up between making my R34 400hp ish and doing lots of track days or buying an evo ix.

Mostly because the evo is a much newer car and it's easy to find one in immaculate condition and they make close to 280kw with a few boltons and e85. Would make a decent daily I think.

Edited by owen1r

Oh hey!

That is I. I have both an R34 and the EVO X, My brother also has an EVO 8 MR.

EVO X is a great daily, and the missus loves beating everything in traffic without trying. But as a weekend car I get more excited driving the Skyline then the Evo.

When I cbf driving the EVO is great.

Evo 8MR is more raw and exciting then the Evo X, so would probably be similair with the Evo 9. But i would say the Evo would get boring quick if your looking for that x factor

Here is my Evo

10984239_10206007752019213_2474433779828

  • Like 1

Not what I wanted to hear, make this choice even harder..Another idea is R32 GTR, as they can do both skids and the whole traction thing...

That track day video made me laugh haha! :laugh: Looks like much fun was had!

Best fun I've ever had in my car, pants off situations included.

Not what I wanted to hear, make this choice even harder..Another idea is R32 GTR, as they can do both skids and the whole traction thing...

Best fun I've ever had in my car, pants off situations included.

Depends what you want:

Evo: Fast, comfortable, new, better handling out of the box. Would kill a GTR on the streets and twisties and tight track. No soul

GTR: Intangible feeling of a car you want

  • 6 months later...

Sold the car a few months ago, now driving around in a Toyota Starlet.

I've looked at a heap of R32 GTR's, none have been up to scratch and most had rust/paint issues or required buckets of money poured into them. I've kind of given up in finding a decent R32 GTR and have since been looking at Evo IX's.

  • Like 1

They are an old chassis, that's for sure. Looking at my R34 now and seeing some problems that are arising, then considering a Skyline 2 generations it's senior - no way in hell I'd ever be happy buying something that old.

Oh well. Best of luck to you and your new Evo. Still think the sale of your 34 was a mistake. :P

  • 5 months later...

Well... After a year of searching and inspecting around 15 cars, I've finally found a replacement. 

I have to learn how to drive the damn thing, having driven an auto commodore for the best part of a year. Genuinley scares the shit out of me.

Thought I'd update this thread as supra forums are shite at best, and to provide a comparison to the R34 if anyone is looking to switch ;) 

14375175_10210592075621116_364613211_o.jpg

14375242_10208706727279172_737939104_o.jpg

14393921_10208706727319173_1628157161_o.jpg

14423809_10208706725119118_1935342789_o.jpg

14424071_10208706726599155_1642683027_o.jpg

14446370_10208706727799185_149107664_o.jpg

  • Like 1

Currently makes 526hp at 22psi on 98, more than double what my R34 would of been putting out lol

Major Mods:

HKS T04z

6boost

Tial 44mm wastegate

HKS 272 Cams

HKS Cam gears

ID2000 injectors

Titan Motorsports fuel rail

Fuel Lab Pressure Reg

HKS Type-R Intercooler

Haltech PS2000

3.5 inch dump with screamer, including interchangeable plumb back pipeScreamer, manifold, all ceramic coated

Blitz NUR Exhaust

K&N Pod 

Exedy Hyper Carbon Twin Plate

B03B Diff

MintSpeed Titanium Strut Brace

Marks Engineering Poly Subframe and Diff mounts

Genuine Recaro Seat. Driver and passenger

Momo Steering wheel

TRD 320kph Speedo

Defi boost gauge with controller

Alpine Stereo/GPS with Rockford Fosgate speakers.

SSR GTV 02 Wheels 18x9+45 front 18x9.5+35 rear, MT ET Streets on rear

STOPTECH BIG Brake Kit, 355mm Front and Rear, 6 piston front 4 piston rear, all braided lines

Powerhouse Industries Twin-in-tank fuel system

Cool car!

19 hours ago, owen1r said:

Thought I'd update this thread as supra forums are shite at best, and to provide a comparison to the R34 if anyone is looking to switch ;) 

So how does it compare? :)

Pretty similar to be honest, supra feels a like it's more of a GT car than a R34 is. Seating position is really low and perhaps not as comfortable as the R34, probably because I'm tall. Need to get some decent coilovers first as my R34 had all the nice handling mods/aggressive alignment, then I'll make the decision on which one I think handles better ;)

It's insane going from a 170kw to a 400kw car, still can't get my head around how quick it is and yet I see blokes who get sick of that power quickly and move onto 800 hp +, crazy. I'm sure in a year I'll want to do the same thing. Off boost drive-ability is still fantastic, but doesn't hit full boost until 4.5k-5k rpm and then it's all in at once. Definitely needs the boost curve flattened out a bit for traction. However in saying that, the 285 MT ET Streets hook up in second gear which I found very surprising. 

Keen to get out on the track asap to find out how it behaves when pushed and so I can finally go through a few gears at full throttle without getting to license loss speeds. 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Half anticipating the next question then: I have two magnets stuck in my oil pan. What should I do? 
    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
×
×
  • Create New...