Jump to content
SAU Community

Recommended Posts

Yo people,

My problem is that my R33 gts is way to loud after hooking my external wastegate up. My skyline has a straight through exhaust which is loud itself, but not overly loud. When i hooked the waste gate up it made such a noise that it pissed off anyone within a mile of me, and honestly caugth me off gaurd. Is there any chance it could be faulty or any way of reducing noise through my system? I can't even hear my turbo flutter anymore, and my flutter was super loud. Vid attached (only sound as i can't film while driving + little skid).

Anyone know of any options?

  • Like 1

Is your waategate venting to atmo? If u plumb it back into tge exhast it will sound same as it did b4. Personally i love sound of gate and would never go back to normal sounding skuline again lol.

it is plumbed to the exhaust manifold and boost is coming just infront of the cold side of turbo. I like the sound, but everyone else in my neighbourhood + copperdogs don't. after 3-4k rpm sounds like vtec is kicking in (i have a really big turbo). Yeah it's venting to atmo, not downpipe

Edited by iTwix

harden the fcuk up!

you're driving far too slow if you are worried about noise :rolleyes:

Haha usually i'd agree with you man, and with a straight pipe i could get away with full boost flutters n shit. I actually had a guy have a shout at me when i went past his house, no idea what he said but he looked pissed.i got 10 demerit points i don't need to popo's attention right now. is there anyway to make the wastegate open in higher revs but keep boost up?

oh I see your problem, i'm told FemFresh will help get that last little bit of sand out of your vagina :)

Do you actually know how to help? or are you just insulting people as an excuse to yourself that you're interacting socially?

Haha usually i'd agree with you man, and with a straight pipe i could get away with full boost flutters n shit. I actually had a guy have a shout at me when i went past his house, no idea what he said but he looked pissed.i got 10 demerit points i don't need to popo's attention right now. is there anyway to make the wastegate open in higher revs but keep boost up?

Do you actually know how to help? or are you just insulting people as an excuse to yourself that you're interacting socially?

Go back and ask this guy what he said, then ask yourself what interacting socially is after you get out of hospital, moron.

Go back and ask this guy what he said, then ask yourself what interacting socially is after you get out of hospital, moron.

Dat cool story, internet intimidation.. please. once again you're not helping, how does it feel to be a literal waste of space?

So you are running straight through pipes and you don't want attention from the police??? Put a muffler on it

i've seen a few people in japan pull baffle's out of there muffler and it reduces sound very well, do you know if/where we can get them in aus?

Edited by iTwix

Plumb it back into your down pipe. You stated you liked it before doing the external. Pretty much answered your question. Venting to atmosphere always creates more noise. That's why people do it. The turbo flutter inside the engine bay gets attention. There's a guy on here that plumbed his through the hood with a tear drop finish. Looked different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hey all, I'm working on a project car and I believe I made some mistakes. I'm looking to remove the clear coat from my car on most panels (except for panels where the paint has blistered, I will sand this), but wanted to know if these steps are correct?   1) Get a red scuff pad (abrasive one) instead of sand paper to remove the shine from the surface 2) get 400 grit sand paper and go over the entire car with a random orbital sander so the surface is smooth and the primer can grab onto something 3) On the blistered paint, go over it with around 120 grit sand paper, go to 240 to smooth out the scratches, then finish on 400 grit. Anything to add in here or any feedback?
    • Agreed, another vote for the Haltech CAN wideband.  No voltage offset errors is a beautiful thing.
    • Just get a Haltech CAN wideband, no need to wire any delay circuits, or relay, etc. Since I've moved to a Haltech CANbus wideband, I have not replaced a single sensor for over 5 years (if not longer, can't remember when moved to Haltach).
    • Small analogue delay circuit with a relay. Just need a trigger, say, fuel pump running for more than 5s or so? Or, you could go full mental and write a sketch for an Arduino.
×
×
  • Create New...