Jump to content
SAU Community

Recommended Posts

Hi all,

I have been having a few problems with my R34 gtt.

If I leave the car off for 4+ hours it will either a) start then stall and start back up fine or b) start then run rough for a second and then it's fine.

I have tried priming the fuel pump a few times with the ignition before starting bit it didn't fix the problem.

Also if I leave it idle for a minute then give it a rev it will blow a lot of white smoke for a second

I have recently gas tested the exhaust and it was very high for hydrocarbons (unburnt fuel)

I am thinking the injectors may be leaking but after some confirmation, who would people recommend to rebuild them? They are nismo 770cc.

Edited by BlackBox
Link to comment
https://www.sau.com.au/forums/topic/436336-leaking-injector-signs/
Share on other sites

I would be doing the following:

Put a fuel pressure gauge on it, turn the engine off and clamp off the fuel lines. if the pressure starts to drop, your injectors are leaking.

Although white smoke wouldn't be indicative of a leaking injector.

Remove the spark plugs and inspect for oil, your valve stem seals may be leaking. While the plugs are out, pressure test the cooling system. Wait and then crank it over. If there is any signs of coolant, you have a head/gasket problem.

Good luck.

Haven't been using any coolant so I'm hoping it's not a head/gasket problem. I have ordered an inline fuel gauge and cooling system pressure tester so I can do those test when they arrive.

Also the Pcv valve hose running to the manifold gets sucked shut at idle, then puffs out like normal at the slightest crack of the throttle, the Pcv valve has been cleaned and is functioning so I'm thinking the hose may have perished and is too soft.

Have you bought the car recently or owned for a long time and it's only just started doing this?

I have a similar problem that is caused by my lack of a 1 way valve on my fuel pump. When cold for some reason it is happy to prime and start up straight away but if I drive somewhere turn car off and go to turn it back on in 30+ mins I need to crank the engine like a normal start, stop and then crank again then it will start nicely. I feel for me it is due to a form of vapor with most of the fuel in my lines draining back to tank and the fuel that is left warming up and becoming a gas as I have had no other issues.

  • 2 weeks later...

I could refit it but I would rather leave it off if possible, really trying to get a clean engine bay,

I have an adjustable sard fpr so I was under the impression the standard items were of no use..

I also just purchased a plazmaman fuel rail which I think eliminates the other damper mounted on the standard rail.

If this is the cause could it be rectified by fitting a check valve or adjusting the fpr

Yeah I set mine too, but they dont seem to take much of a knock to upset them. I also grabbed the wheel on the throttle body and turned it. It wasnt fully closed so when I had set it up before it wasnt set with the throttle on the stop haha. so I cleaned the butterfly too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...