Jump to content
SAU Community

Recommended Posts

http://www.skylinesaustralia.com/forums/sh...ead.php?t=43555

I have said it many times before...do not even contemplate taking your GTR onto the track if it doesn't have a proper baffle in it. People in this thread have punched a hole in their blocks or spun bearings.

It is not a very expensive thing to do but will save your engine. If you want to do a track day in your GTR, please do up your sump first. Oil cooler is necessary, but will not stop your oil from surging.

Link to comment
https://www.sau.com.au/forums/topic/43640-gtr-owners-read-this/
Share on other sites

Yes, The R won't be seeing any real action till it has new sump with baffles, large capacity oil pump, oil cooler, bigger radiator, oil restrictors, enlarged oil return galleries and catch-can. So by about the year 2010 I think I should be ready.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=43555

It is not a very expensive thing to do but will save your engine.

Apparently the engine has to come out to take the sump off. Does anyone know what it is worth to fit baffles??

Yes, The R won't be seeing any real action till it has new sump with baffles, large capacity oil pump, oil cooler, bigger radiator, oil restrictors, enlarged oil return galleries and catch-can.   So by about the year 2010 I think I should be ready.

you forgotten exhaust, dump pipe. new turbos, big FMIC, 6 pots brakes, etc ,etc :D

To baffle your sump i think it costs around 200-300 done by the mechanic i use. You might find someone to do it for cheaper.

My Trust sump set up was cheap, but that's because I'm a dodgy Asian. I did not do the sump myself as I do not have an engine hoist nor do I have an angle grinder and a welder. Alternatively, you can buy a ready made JUN sump (not the parts to baffle the sump) for about 3 times what I paid for the Trust item.

I have said it many times, engine revs or how many laps are not important. How hard you turn is the important factor. QR has 3 right hand turns alone after the main straight, consider how much the oil would have moved to the left. Then think of the starved engine being revved to pull the car through turn 3 and bang you have a hole in your block.

So far, my mechanic has handed out accurate and invaluable advice to me, although it doesn't come cheap, although his advice regarding the sump was:

"Some people have gotten away without a sump for a couple of track days, but it's a $10k risk you are taking. If you're unlucky, your engine will blow by turn 2."

I don't know where people got the impression that GTRs are track ready from factory. They're far from it. They're a road going homologation of a race car, except the N1s or the special edition GTRs.

You have no idea how many times I thought I have prepared my car for the track only to be told this this this needs to be changed first. Not a cheap hobby nor car to choose for the track.

On a side note, Sydneykid has explained why the GTRs experience higher oil temps, i.e. 2 turbos and mainly because the front diff runs through the sump.

To baffle your sump i think it costs around 200-300 done by the mechanic i use.

Hey rb26dett, who is your mechanic? $200-300 sounds bloody cheap. I NEED to get mine done ASAP and am currently trying to get some pricing.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...